RB270PXYQ3 Whirlpool Wall Oven - Instructions

very easy repair took less than 5 minutes removed racks from oven and used a number 2 phillips head screwdriver to remove the 2 screws pulled element out detached the 2 wires and removed element reattached wires to new element pushed element back in and reinstalled the screws.done note* i found this to be a good time to clean the oven so the night before part was to arrive i sprayed a good coat of oven cleaner on the 3 sides and lower part of oven after removing element it made it very easy to clean the oven up.

Remove the door. This takes less than a minute. pull the door up and out. have a friend help you do this. Set it on a table and remove the outside panel screws and separate the outer face cover from the inner. this will expose the many glass window. the inner window has screws hidden under foam strips. these four screws must be removed to gain access to all other window panes. clean and replace as needed, then reassemble. Be carful not to drop the glass panels. also make sure that any insulation is reinstalled. Reinstall the door back into the spring loaded hinges. done

Had to screw off old terminal block & screw on new one

took the two phillip head screws out then gently pulled element forward to expose wire connection. then used needle nose pliers to disconnect wires. removed old element and replaced.simple task. took 5 min

My new part was a exact fit, 20min replacement time, works great.

Unpluged coil and replaced with new.

Fast shipping and the part was very easily installed.

Super simple....saved $75 service call....$50 labor....+ mark-up on part....saved at least $135.00....Perfect!!!!!!

Order online - rec'd the very next day. Probably took longer to go get the screwdriver than anything. It was truly easy and now we have our oven back. And hopefully for quite a while longer! (it's 21 years old already)

Simply had to turn off the power to the stove, unscrew the two screws holding the element in place, remove both wires from the contacts, attach the wires to the new element, screw the element back in place, and turn back on the power to the stove. Entire operation took less than 10 minutes!

I read how two others had fixed thiers on this site. Put a nail in each hinge then lifted door strait up off hinges and laid it on kitchen table. removed 9 screws around door. Lift inner door up. remove 3 nut head screws on each side and lift that shield up and out. replaced glass and the put it all back to gether. saved my self a good 200.00 plus dollars. thank you soo much. I will be back if I need anything else..Brenda..

Very easily, took old one out, install new one, works perfectly. Directions were great, delivery service could not have been more efficient. Been baking ever since. thanks

First removed the oven door for easy access, removed two screws holding the element pulled old Element from back of oven to expose two connecting wires, disconnected wires and removed old Element. Connected wires to new Element pushed Element back into place and replaced two mounting screws put oven door back on, took about ten minutes. Very Easy!

Quick google time and problem was isolated to heating element and brought me here to partselect. It ship fast and oven was working again in no time. Super easy repair

The only problem we had was hanging on to the small screws that held the element up. No power screw drivers, so it took a little while to keep a hold of those screws. Considering we are 87 and 84 we feel great that we were able to replace both the bottom element and the broiler. I like the stove, and preferred not to shop for a new one. "Thanks for prompt great service and the video helped. Patty Montag