RB270PXYB3 Whirlpool Wall Oven - Instructions

My new part was a exact fit, 20min replacement time, works great.

Unpluged coil and replaced with new.

Fast shipping and the part was very easily installed.

Super simple....saved $75 service call....$50 labor....+ mark-up on part....saved at least $135.00....Perfect!!!!!!

Order online - rec'd the very next day. Probably took longer to go get the screwdriver than anything. It was truly easy and now we have our oven back. And hopefully for quite a while longer! (it's 21 years old already)

Simply had to turn off the power to the stove, unscrew the two screws holding the element in place, remove both wires from the contacts, attach the wires to the new element, screw the element back in place, and turn back on the power to the stove. Entire operation took less than 10 minutes!

I read how two others had fixed thiers on this site. Put a nail in each hinge then lifted door strait up off hinges and laid it on kitchen table. removed 9 screws around door. Lift inner door up. remove 3 nut head screws on each side and lift that shield up and out. replaced glass and the put it all back to gether. saved my self a good 200.00 plus dollars. thank you soo much. I will be back if I need anything else..Brenda..

Very easily, took old one out, install new one, works perfectly. Directions were great, delivery service could not have been more efficient. Been baking ever since. thanks

First removed the oven door for easy access, removed two screws holding the element pulled old Element from back of oven to expose two connecting wires, disconnected wires and removed old Element. Connected wires to new Element pushed Element back into place and replaced two mounting screws put oven door back on, took about ten minutes. Very Easy!

Quick google time and problem was isolated to heating element and brought me here to partselect. It ship fast and oven was working again in no time. Super easy repair

The only problem we had was hanging on to the small screws that held the element up. No power screw drivers, so it took a little while to keep a hold of those screws. Considering we are 87 and 84 we feel great that we were able to replace both the bottom element and the broiler. I like the stove, and preferred not to shop for a new one. "Thanks for prompt great service and the video helped. Patty Montag

Just changed out the old and the new. That's all that was needed.

First unplugged oven from wall. Removed two screws from back of oven above element. Pulled element out from oven back with wires attached. Gently detached clips from element. Replaced old element with new one and inserted wire clips onto end of element. Replaced element into back of oven and replaced screws. Yea, I did something!