Models > KTRV20MGWH00 > Instructions

KTRV20MGWH00 KitchenAid Refrigerator - Instructions

All Instructions for the KTRV20MGWH00
886 - 891 of 891
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Icemaker exstracter (sp?) would not completely rotate and dump ice intro bin.
Removed ice maker and installed new part
Parts Used:
Icemaker Control Assembly
  • mark from McDonough, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped making Ice
Turned off the icemaker and took out the hex screw at the back of the unit that held the cable guard. The ice maker was easy to slide out after releasing guide locks on each side of the unit. Pulled the unit forward and released the electrical connection. With the unit on the cabinet, I removed the motor housing cover. Took out the 3 scews holding it in place and the old motor was out. Just reverse the steps putting the new one in. In an hour or two we heard ice dumping into the holder.
Parts Used:
Icemaker Control Assembly
  • Glenn from Dowell, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
No ice made by ice maker
imakers first replaced the water inlet valve. that didn't fix the problem, but increased the water column to the water dispenser. replacing the icemker cured the problem! I now have $200 ice!!! your service was great! the part arrived as promised!
Parts Used:
Replacement Ice Maker
  • John from belfair, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
no ice, motor not running
Removed icemaker, replaced motor and reinstalled. Very quick delivery of parts, fit perfectly.
Parts Used:
Icemaker Control Assembly
  • Randy from Mesa, AZ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
ice maker stopped making ice
replaced the motor control assembly and it works great
Parts Used:
Icemaker Control Assembly
  • harold from new faifield, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Water leaking from ice maker .
Istalled new ice maker in about twenty minutes.Very satisfied .
Parts Used:
Replacement Ice Maker
  • Douglas from Santa Ana, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KTRV20MGWH00
886 - 891 of 891
Back to Top