Models > KSSS48QDX05 > Instructions

KSSS48QDX05 KitchenAid Refrigerator - Instructions

All Instructions for the KSSS48QDX05
901 - 908 of 908
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Water spout in door broke
I took the freezer door handle off, removed the door panel covers, removed the ice/water cover, then removed the backing to expose the tubing from the broken spout to a coupling behind the enclosure. Cut the tubing to length on the replacement tip, secured coupling, installed adn then put the door back together.
Parts Used:
Nozzle and Tube Kit
  • Robert from Gig Harbor, WA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
icemaker quit working
Definitely watch the demo video. It described every aspect to remove old unit and install the new one. Made the install 'childs-play'!!
Parts Used:
Replacement Ice Maker
  • Dan from Menard, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Icemaker exstracter (sp?) would not completely rotate and dump ice intro bin.
Removed ice maker and installed new part
Parts Used:
Icemaker Control Assembly
  • mark from McDonough, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped making Ice
Turned off the icemaker and took out the hex screw at the back of the unit that held the cable guard. The ice maker was easy to slide out after releasing guide locks on each side of the unit. Pulled the unit forward and released the electrical connection. With the unit on the cabinet, I removed the motor housing cover. Took out the 3 scews holding it in place and the old motor was out. Just reverse the steps putting the new one in. In an hour or two we heard ice dumping into the holder.
Parts Used:
Icemaker Control Assembly
  • Glenn from Dowell, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
No ice made by ice maker
imakers first replaced the water inlet valve. that didn't fix the problem, but increased the water column to the water dispenser. replacing the icemker cured the problem! I now have $200 ice!!! your service was great! the part arrived as promised!
Parts Used:
Replacement Ice Maker
  • John from belfair, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
no ice, motor not running
Removed icemaker, replaced motor and reinstalled. Very quick delivery of parts, fit perfectly.
Parts Used:
Icemaker Control Assembly
  • Randy from Mesa, AZ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
ice maker stopped making ice
replaced the motor control assembly and it works great
Parts Used:
Icemaker Control Assembly
  • harold from new faifield, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Water leaking from ice maker .
Istalled new ice maker in about twenty minutes.Very satisfied .
Parts Used:
Replacement Ice Maker
  • Douglas from Santa Ana, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KSSS48QDX05
901 - 908 of 908
Back to Top