KEYE665BAL2 KitchenAid Dryer - Instructions

My dryer element was not heating and there did not appear to be any damage to the element itself. There were several thermal fuses attached to the heating element enclosure. Test them with a voltmeter and see if there is conductivity. If there isn't, then the fuse is faulty/broken. Replaced my broken fuse with 3390915 and the element heats once again. The original part was not the 3390915, but Kenmore recommends replacing the stock thermal fuses with 3390915. Thank you!

replaced thermal fuse but the same result running to hot then it will not start after. had decided to reorder thermal fuse, high limit thermostat cycle thermostat. still awaiting parts as of now.

the video was very helpful

My dryer is a KitchenAid KEYE660W (electric). I tried to start the dryer but it would not run. I did notice that if I held the start button down, I could feel light vibrations through the button. Searched through Yahoo and this site and determined that this is often a bad Thermal Fuse. Used the diagrams on this site to locate where it should be, removed the back of the dryer with a screwdriver, removed the two wires clipped to the Thermal Fuse and unscrewed the Thermal Fuse. I had a friend test the fuse with a Multimeter. It was bad so I ordered another one on this site and it arrived in two days. Screwed the Thermal Fuse back in and clipped the two wires back on. Started the dryer and it worked!!! Replaced the back of the dryer. This repair took 15 minutes MAX and taught me a little bit about Mulitmeters.

Watched how-to video provided on PartSelect website. Most time was spent cleaning out the cabinet of lint and other debris. I found over 5 bucks in loose change! I Found pulling the belt over the motor pulley to be the trickiest. Note: my dryer will be 30 years old come this September. I wonder how many more years I'll get out of it!

Replaced actuator switch lever. Exact replacement. Worked like a charm.

I followed the repair instructions that you had on line. Thank you

took unit apart looked for any part that looked out of place or damaged. found that heating element had a break in it. went on line found PART SELECT site entered my info (they made it real easy to do) and there was the part i needed was okay with price. part delivered 3-4days (week-end included) installed part dryer now works. sure beat having to buy new dryer especially right now. now we just have to get caught up on laundry. i most highly recommend PART SELECT to the pro or the do it yourself person. thanks, paul..

video describing repair very helpful. just folling it made the repair easy

Located broken front door safety switch actuator. Ordered new part shown on the diagram. Removed broken part, installed new part, start dryer,runs fine.

Replaced the heating element, simple enough. Hardest part was getting the solid metal exhaust pipe back on and through wall!

replaced stock belt tensioner with one with pulley. i hope that solves my problem. just want to add that you guys saved me a ton of money ! thanks and God Bless

easy to simple and hope it continues to work.

I'm a 68 year old single lady who watched the video and just followed the instructions. Took the back off, tested all the parts involved with heating and the only part that didn't have any continuity was the top part of the thermal cutoff fuse. After receiving the part I removed the old one, put the new one in, put the back on and turned the dryer on. It heated right up. I also had a part that I didn't need and your return dept. made it very easy to return. I love this site. Save me a ton of money.

I watched a video on youtube about how to install a dryer heaing element, took pictures of the wires on my cell phone, then just installed the new part. Plugged it back in and works like a charm!