11741441-1-M-Whirlpool-WP3390291-High Limit Thermostat

( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

High Limit Thermostat

★★★★★

4 Reviews

Rated by 23 customers

Easy

15 - 30 mins

Ratings submitted by customers like you who bought this part.

$ 60.12

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11741441

Manufacturer Part Number WP3390291

Manufactured by Whirlpool

Product Description
Troubleshooting
Questions and Answers
Part Videos
Customer Repair Stories
Customer Reviews
Model Cross Reference

Product Description
Troubleshooting
Questions and Answers
Part Videos
Customer Repair Stories
Customer Reviews
Model Cross Reference

Product Description

High Limit Thermostat Specifications

With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 250 degrees Fahrenheit. The element will kick back in when the temperature drops to 190 degrees Fahrenheit. Differential of 60 degrees.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

No heat or not enough heat | Takes too long to dry | Will Not Start | Too hot

This part works with the following products:

Dryer, Washer Dryer Combo.

This part works with the following products:

Kenmore, Whirlpool, Roper, KitchenAid.

Part# WP3390291 replaces these:

AP6008306, 3390291, 696397

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

5 questions answered by our experts.

< Prev
1
Next >

Sort by:

JOHN

February 21, 2018

High temperature cut off thermostat from a Kenmore dryer. I measure 30 ohms across the terminals. Has it failed? The dryer doesn't seem to heat at all.

For model number 3390291

Hello John, thank you for your question. At room temperature, testing the thermostat should produce a reading of zero. If the reading is something else the thermostat is bad and would need to be replaced. If the appliance is running, but not heating at all (blowing cold air), it is most likely a thermostat issue, or fuse issue. If you could provide the model number of the appliance we can provide more information! I hope this helps!

12 people found this helpful.

Was this helpful?

Thank you for voting!

Robert

April 27, 2018

I replaced the heating element, the thermal fuse and the high temperature thermostat and still have no heat. Does it matter which prong the red and white stripped go on the heating element and thermostat? Right now the striped one is on the bottom prong on the thermostat and on the prong closest to the drum on the element. Is that right?

For model number LEC6848AQ3

Hello Robert, Thank you for your inquiry. The red and white wire goes on the bottom and the solid red one should be on the top. The other parts to check would be the thermal cut off kit, the internal bias thermostat/cycling thermostat, the terminal and wire kit, the electrode/sensor, and the blower wheel. Also make sure the ducts are clear and your dryer has plenty of space in back to suck in air. Hope this helps!

3 people found this helpful.

Was this helpful?

Thank you for voting!

Bob

August 16, 2019

My Whirlpool electric dryer seems to be overheating. I have replaced the thermal switch 3977394. it was open instead of n/c. the other sensors measure a short or show continuity. i believe this is correct. the dryer still seems to be getting too hot. I have a laser thermometer. are there some readings i could measure? how hot should a electric dryer get internally and the exhaust?

For model number LEN3434AW0

Hi Bob, The single most common reason why clothes dryer overheat is restricted airflow. When there's a blockage in the internal duct work, the hot air will become trapped inside the drum where it creates potential fire hazard. I am not sure of what is too hot, but on average a dryer should get 140-155°F on high , so too much higher would be an issue. But you could contact the manufacturer directly for more specific information. Thank you for your question and good luck with your repair!

3 people found this helpful.

Was this helpful?

Thank you for voting!

Jesse

March 17, 2022

My dryer doesn't turn off in Automatic mode even though the clothes are dry. Is this the part I need to fix it?

For model number LE5200XTW1

Hello Jesse, Thank you for the question. We suggest testing the Dryer Cycling Thermostat. You will find this part attached to the blower wheel housing. With a multimeter you can test the two large terminals on the thermostat, they should read closed for continuity and the two small ones should show an ohms resistance value. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

2 people found this helpful.

Was this helpful?

Thank you for voting!

Related Parts:

Dryer Cycling Thermostat

$27.02

November 2, 2022

Press start to dry and it clicks and then nothing starts already replaced the thermal disconnect help it doesn’t start still

For model number MED9700SBO

Hello Ky, thank you for your inquiry. According to our research, we would recommend checking the following parts to fix your issue: The door Switch, part number PS334284, Drive Belt, part number PS11722115, and Thermostat, part number PS11746740. If you require assistance to place an order, please contact customer service. We hope that helps!

Was this helpful?

Thank you for voting!

Related Parts:

Thermostat, Internal-Bias

$46.12

Drive Belt

$21.20

Door Switch and Actuator Kit

$49.11

< Prev
1
Next >

Part Videos

Replacing your Kenmore Dryer High Limit Thermostat

Customer Repair Stories

Average Repair Rating: 4.0 / 5.0, 23 reviews. What's this?

< Prev
1
2
3
Next >

Sort by:

Dryer blew cold air.

PartSelect is great for providing parts as requested. Unfortunately, neither of the 2 parts I ordered were on my machine. My bad for not looking at the actual part instead of the description. A word to the wise!

Other Parts Used:

Dryer Cycling Thermostat

Tom from High Point, NC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

744 of 791 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

It was taking alomost twice as long for a load of clothes to dry.

First I had to take the back cover off. I removed the heating element and the thermostat and replaced them with the new repairs. It was relatively simple---any handiman could do it and would not require a repairman. We talked to a salesman at Sears to see what they thought the problem could be and then got on the internet. The best part was that the repairs came within a few days of placing my order. That was super!!!
Thank you for your fast response.

Other Parts Used:

Heating Element - 240V 5400W

Donna from Bushnell, NE
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

254 of 275 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

dryer works but no heat.

Measured resistance on thermostats & heating element. Found thermostat open so ordered replacement part and heat again.

Tom from Grove, OK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

35 of 42 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

no heat

Frist I looked on Parts Select site at there diagrams to figure out where the heating element was . After that it was easy to remove the back panel and expose the heating element box.The screw holding the element is a little hard to get too , but still easy to remove.You have to pull the box out a little to slide the element out. the only thing I did wrong was not buy both thermostates at the same time,and I had to spend a little more because the one part is not sold by itself. Over all a breeze

Other Parts Used:

Heating Element

garrett from waynesville, OH
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set

22 of 26 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Dryer would not heat during cycle.

I followed the video offered by your website and it was very informative and right to the point. Was very brief and easy to follow. I ordered the parts before 10:00am and received the parts the next day with the regular shipping.Very good website others need to benchmark you. I will use your service for future repairs and refer you to others.

Other Parts Used:

Heating Element

Wayne from Sullivan, MO
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

12 of 16 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Taking 90 minutes + to dry one load

Removed the back of the dryer about 8 screws. Removed the Thermostat 250 F and replaced with new. Dries a load of clothes in one cycle on medium. Not bad for a 16 dollar part. I am a computer tech and I am used to taking computers a part but I think most people that are in anyway mechanically inclined and can look at a diagram could do this and save yourself a lot of money.

Bryan from newington, CT
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Dryer not producing any heat

Removed rear panel after disconnecting the Power.Disconnected the fuse ,thermostat 250f, and replaced them. Then removed the old heater and installaled the new one. Then plugged in the heater and still no heat..So I have decided to replace cycling thermostat and temperature switch,which I ordered yesterday. These are the last two items that you suggest as being a cause.

Other Parts Used:

Dryer Thermal Fuse

Heating Element - 240V 5400W

Walter D from Bridgewater, NJ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set

5 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Element not heating up.

Opened access door, noticed main power wire to heating element was partially melted. This was caused by a bad connection to the drying element, loose. Removed heating element assembly. Cut bad section of wire and added new connection. While doing this the thermostats plastic casing cap came off ! Probably due to exessive heat / resistance from the bad connection. This confirmed why there was no heat. Intalled new thermostat and and am now good to go !

Phillip from Breinigsville, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

dryer will not,dry clothes,but drum run

Took, back cover out,but first i disconect the electricity,i give a fast look,looking for anything wrong and i saw a thermostar burn out in the element case,the bottom one,a thermostart
250 f. but a did a search in the internet,and found that when a bottom thermostart burn out, the top one had to be change,so i did a continuity text in the top one and was open ,i have it,a used one, change and connect the dryer to the Electrical outlet and (walac)it start the dryer,problem solve

atolfo from allentown, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Dryer would not turn on

I am really not sure because my husband did the repair and it took him no time at all. I know he removed the back panel on the dryer, and the 2 parts were in plain site. He took the old off put on the new part. We turned the dryer on and it worked better than ever! This site is the best for home repairs. My husband was a little leary but we didn't want to buy a new dryer and we live in a remote area with no repair people, so for the low cost of these parts it was well worth it! Will diffently use this site again!!!!!!!!!!

Other Parts Used:

Dryer Thermal Fuse

Brownell from Clayton, NM
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

< Prev
1
2
3
Next >

Customer Reviews

Average Rating:

★★★★★

4 Reviews

3.3

Filter By Rating:

5 Stars

2
4 Stars

0
3 Stars

0
2 Stars

1
1 Star

1

< Prev
1
Next >

Sort by:

★★★★★

Verified Purchase

Awesome service

The part ended up not being the only part needed, but was sent super fast and arrived in great shape. Will use this company again as soon as I save enough money for the next part.

★★★★★

Verified Purchase

easy repair.

exact fit part worked as expected

★★★★★

Verified Purchase

Wrong part

I got this part thinking it was the problem but come to find out the part I need is sold only as a package along with the part I bought by itself. I feel I was totally ripped off! The part I bought was over 40.00 and the kit is just over 50.00. Now in order to fix my dryer I have to buy the kit, the most expensive part I already bought and was told I cant exchange and pay the difference for the kit. I feel I was misled and should have at least been shown the kit before I bought this part. Not being an appliance expert I would've paid the extra 10 and got the kit to begin with. Now I would rather spend hundreds of dollars on a new dryer then give you people another penny!!

★★★★★

Verified Purchase

Easy repair once you knew how to replace it. Information on my model dryer was not available on the web.

Part was over priced and took over a week to receive it. Will probably not order from your site again. Sorry!

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11741441
Manufacturer Part Number: WP3390291

Kenmore

11060012000

Dryer

Kenmore

11060052990

Dryer

Kenmore

11060052991

Dryer

Kenmore

11060056990

Dryer

Kenmore

11060056991

Dryer

Kenmore

1106007299

Dryer - Kenmore Dryer Model 110.6007299 (1106007299, 110 6007299) Parts

Kenmore

11060072990

Dryer

Kenmore

11060072991

Dryer

Kenmore

11060092990

Dryer

Kenmore

11060092991

Dryer

Kenmore

11060094990

Dryer

Kenmore

11060094991

Dryer

Kenmore

11060096990

Dryer

Kenmore

11060096991

Dryer

Kenmore

11060097990

Dryer

Kenmore

11060172000

Dryer

Kenmore

11060232000

Dryer

Kenmore

1106090199

Dryer - Kenmore Dryer Model 110.6090199 (1106090199, 110 6090199) Parts

Kenmore

11060901990

Dryer

Kenmore

1106090299

Dryer - Kenmore Dryer Model 110.6090299 (1106090299, 110 6090299) Parts

Kenmore

11060902990

Dryer

Kenmore

11060904990

Dryer

Kenmore

1106090799

Dryer - Kenmore Dryer Model 110.6090799 (1106090799, 110 6090799) Parts

Kenmore

11060907990

Dryer

Kenmore

11060912990

Dryer

Kenmore

1106092299

Dryer - Kenmore Dryer Model 110.6092299 (1106092299, 110 6092299) Parts

Kenmore

11060922990

Dryer

Kenmore

11060924990

Dryer

Kenmore

1106092799

Dryer - Kenmore Dryer Model 110.6092799 (1106092799, 110 6092799) Parts

Kenmore

11060927990

Dryer

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service

Hello!

High Limit Thermostat

High Limit Thermostat Specifications

Replacing your Kenmore Dryer High Limit Thermostat

Organize Your Home in a Snap!