All Installation Instructions for Kelvinator Refrigerator KATR1816MS1

Crisper Pan

Just removed the broken pan and installed the new one within 2 minutes. Really simple

Parts Used:

Refrigerator Crisper Pan

Deepankar from Novi, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

13 of 20 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

No shelf in Freezer compartment though obvious slots provided.

Used model # of frigidaire on your web site... reviewed parts available... noticed shelves abailable... zoomed in to measure using crosshatch background... measured my freezer compartment... seemed doable... ordered shelf... receivednext day... attempted to slip in slots... had to grind off 3/16th inch on two legs... slipped in... Perfect!

Parts Used:

Freezer Shelf

Joe from Dallas, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

10 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

the rail broke on the meat drawer holder

I removed the shelf that hold's the rail's then one (1) screw that hold's the rail in place then I replaced the shelf. Simple & Easy!!

Parts Used:

Drawer Support Rail - Right Side

Geronimo from McAllen, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken Refrigerator Door Shelf Retainer Bar

We took off the broken bar and put on the new one. It clips on. Took about 10 seconds and could have been done by a 5 year old.

Parts Used:

Door Shelf Retainer Bar

Ward from Stockton, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken plastic parts-bins, rails

pulled old ones out and replaced, had to remove 1 part that held a drawer

Parts Used:

Door Shelf Retainer Bar

Drawer Support Rail - Right Side

Refrigerator Crisper Pan

Frank from Cedarburg, WI
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

FREEZER WAS COLD FRIDGE WARM

YOU TUBE VIDEO POINTED ME IN THE RIGHT DIRECTION. USED MULTI METER TO CHECK FOR VOLTAGE. NONE, REPLACED DEFROST HEATER. WORKS LIKE A CHARM, PART DELIVERED TO MY DOOR FOR LESS THAN $60.00, IN TWO DAYS FROM PARTSELECT. FIXED IT MYSELF FOR LESS THAN THE COST OF A SERVICE CALL.

Parts Used:

Defrost Heater

JEFF from OLIVET, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

ice was forming on inside of freezer. door not making complete seal.

door gasket just needed to be pulled out of edge around door and then the new one installed in the edge around freezer door.

Parts Used:

Freezer Door Gasket - Black

john from DALLAS, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

9 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Handle broke

Removed 2 screws from top of handle. Removed 1 screw from bottom. Attached new handle. Very easy.

Parts Used:

Door Handle with Mounting Block

Arthur from Bradenton, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

10 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken bar and seal

Snapped in the bars and with the seal once on the track went right on

Parts Used:

Door Shelf Retainer Bar

Mark from Sandwich, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken meat drawer support

Took out the broken piece, replaced it with the new support using only a screwdriver, and VOILA, it was finished. Thanks!

Parts Used:

Drawer Support Rail - Left Side

Sue from Ocala, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

8 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken drawer support and drawer'

Drawer support held in by one screw drawer slide in no problem

Parts Used:

Meat Pan

Drawer Support Rail - Right Side

Cameron from Bronx, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

9 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Freezer and refrigerator stopped cooling

The site offers a video for this part which worked perfectly. In addition to replacing the part, since the cardboard panel was off, we also cleaned all the dust off of the coils which someone recommended to do annually.

Parts Used:

Run Capacitor

Amy from PITTSBURGH, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

8 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken fan with vacumme cleaner

I remembered to unplug first. took the little cover off on the bottom, unscrewed the 3 screws. then just held the base that the fan is on and pulled rite off, pushed the other one rite on. it took me five min, i want to say thanks to parts select, had the part, fast shipping, great job, thank you.

Parts Used: