JFC2089HES Jenn-Air Refrigerator - Instructions

PartSelect made it so easy, I entered my model number on their site, stated that I needed the glass shelf and the part came up and I ordered it in only a few minutes. I was still skeptical when the glass arrived two days later that it might not be the right part but I slid the glass in and it fit like a glove, wow was I impressed! Thank you so much because it was a pain without that shelf and I will definitely contact you again should I need anything else.

Part Select's easy to use website helped me fine the part quickly and tips on change out. It was so easy, I only regret that I waited so long to so it.

Received the grille and placed it in it's place. Not difficult at all.

I watched the video and thought "I can do this". Made some notes and then proceeded to remove the old switch and replace with the new one. Thank you.

I have never before seen a bulb with the filament intact not light. If the bulb's filament seems intact, screw the bulb into a known working lamp and see if it lights. When screwing it back into the socket in the fridge, it takes a bit of extra effort to fully seat (until it does, it won't light!). For replacing the switch, I unplugged the unit, used a paint scraper and worked it under the switch bezel from the right side. A bit of moxie, and the switch came out. The replacement switch had a different spade contact spacing than the original. I used a pair of scissors to cut the rubber bridge between the two switch wire connectors so I could connect to the new switch. In the end, it turned out to be the bulb. NOTE: The Model TC18KL is _not_ listed! What I finally found that the number "P7803211WL" on the sticker is actually a manufacturing code. Found this out by searching, and Sears' part search came up with matches.

self installled

Snapped the old one out and the new one in place. Only took about one minute.

Followed the instructions that came with the email(giving other people's experience with the replacent) indicating that the part had been shipped. It was quite easy and I am not very a good DIY person. Thanks for the information and instructions

The part came in 5 days from time order. take less then 10 minute done. part work well, have ices again, Thank you Part Select. we don't have to buy a new Rerigerator

I started by changing the water inlet valve. It made one batch but it did not eject into the ben. I removed the ice maker and found that the coating inside was bad. I changed out the ice maker and it is now making lots of ice.

I turned the water supply off and installed the new filter, which was easy. the hard part was finding the water filter at my local home improvement stores; they don't carry it. In the future I will use only Part Select.

Relaced the defrost heating coil and defrost thermostat. Works great. Just wanted to mention the lady I talked to from cutomer service was wonderful, sorry I don't remember her name, but very helpful. Thank you.

Looked at the appliance's booklet to see how it fit together, then installed it.

PartsSelect makes it so easy. I love that they inlcude a picture of each part so I am sure I am buying the right thing!

I went on line and viewed the video. It looked so easy I ordered the new ice maker. Having the information I was able to take apart the old one and view the problem. By the time the new part arrived I was experienced with the installation. I was shocked when the new ice maker arrived within 1 day. I completed the installation without a hitch, I was delighted with the ease of installation and the operation of the new iace maker.Thanks again...Ray