JBC2088HTW Jenn-Air Refrigerator - Instructions

this part basically pops in and out on each end of pantry lid. Took about 30 seconds to replace it! I was amazed with the quick service I received from your company too! It was shipped the same day I placed the order and received it the very next day! Way to go!!

Easy project. Removed pantry drawer, veggie drawers, and glass shelf. Used socket to unscrew screws. Removed back air regulator from right end cap. Attached back air regulator to new right end cap. Put everything back. Simple as can be...did it in 10 mins.

followed instructions on box

Changed bulb, not the problem, had to remove switch to identify correct choice to order (3 pronged verus 2) after that it was easy beyond having to stand on my head to make the exchange. (N B before removing old switch it actually came back to life)

removed the pantry drawer, removed the 2 vegetable drawers, removed the glass pantry cover and supports. Unscrewed the 3 screws from the left pantry end cap with a 1/4" nut driver and removed the end cap. Removed the pantry drawer slide from the end cap with a phillips screw driver, then installed the new parts assembling in the reverse order.

Pulled refrig out to gain access to back. Turned water supply valve off(water source). Removed water valve from lower left corner of refrig. Marked individual lines to valve. In this case, there were only 3 lines to remove. Removed 2 electrical connectors to water valve. Simply removed water lines and reattached to new valve. Re connect electrical connectors and mount new valve to refrig. Turn main water supply on and check. Water was now being supplied to icemaker. Complete time spent was 40 minutes. That included cleaning up behind refrig and testing to insure ice maker was now functioning. Very straight forward and easy repair. Saved myself anywhere from $75 to $125 by doing it myself.

Watched the video on the web site and then followed the instructions. It was very easy to change. After changing it, I filled it with water from a cup to get it started making ice since the video does not address how to do this. It has been working well ever since. If you are handy with tools, you can do this.

I put in a new ice maker because it was not in very good condition. The water valve had a very slow leak which allowed water to freeze on the way to the ice maker and plugged the line. This problem was in one of your repair articles all of which were very welcome

I had to replace the whole unit. The tray should have lasted longer and there should have been a replacement tray available.The installation was easy. 3 screws removed, unplug unit, turn off water and put in new unit.

popped out the old lid and put in the new one,great service and arrived quick.