Models > IX5BBEXDS00 > Instructions

IX5BBEXDS00 Whirlpool Refrigerator - Instructions

All Instructions for the IX5BBEXDS00
511 - 519 of 519
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
ice maker was flooding and making one big block of ice
just like video very easy ! Thank you for the fast service and good information for installation.
Parts Used:
Replacement Ice Maker
  • Jayne from Auburn, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Ice maker dripping water creating issues in freezer
Searched internet until I found a company(yours) with the part needed. Could not locate locally refrigerator too old. After finding"Part Select" site I watched the video provided. It was very instructive and helpful. I cancelled calling any repair service and did the repair myself. The part was delivered fast and I had no problems with the repair. Your confirmation e-mail of part being shipped again provided the video for the repair. I only watched again after the repair to check myself, all went well. My Ice maker is working great again and I consider this purchase money well spent. I was considering another refrigerator but will now keep the Kitchen aid longer, Thank you.
Parts Used:
Replacement Ice Maker
  • Robert from Vienna, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice Maker heating element stopped working . Ice was stuck in ice maker.
Just removed old ice maker which took about 2 minutes. installed new ice maker in about two minutes. Simple and easy install.
Parts Used:
Replacement Ice Maker
  • jeff from Roland, AR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Makes ice then floods bin making huge wad of ice
I removed the 3 screws but also removed the front screw of the left bin rail. This gave more room to maneuver I/M into position. The cover shown with the enclosed instructions does not show an Ice Plus (blower assy.). By removing the two mounting clips fron old unit and snapping on new one blower unit fits as original. Overall a very simple and quick repair. Note: None of the cables Inclosed were used as my harness does not unplug from wall. Thanks for the quick service PartsSelect.
Parts Used:
Replacement Ice Maker
  • Bobby from Lansing, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker leaking into ice bin
Turned off circuit breaker. That turns off both power and water. No need to move refrigerator. I backed out the 2 top screws about a quarter inch and then removed bottom screw with a quarter inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection. The new Ice Maker was wired correctly for my refrigerator so all I had to do was reconnect the power connection and mount new Ice Maker on the two top screws and install the bottom screw. It took about two hours for the new Ice Maker to start it's cycle but after it did, it worked GREAT. Part Select service was OUTSTANDING, ordered part one day and received it in two days and I live in a very remote location. Recommend PartSelect to everyone.
Parts Used:
Replacement Ice Maker
  • Frank from Cat Spring, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped working
I followed the video on the web site. Easy squeezy.
Parts Used:
Replacement Ice Maker
  • Harry from Placentia, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
No Ice
Should have. . . . Just taken the ice maker out in the first place . . . . When I saw no ice I assumed the timer was bad. . . Replaced it. . Then when that didn't fix it again assumed that water valve was bad. . . . Replace that also to no avail. . . . Finally took out the ice maker and saw that the heater had stopped working cuz there was still ice stuck in it. . Replaced ice maker. . . All good. . . The water valve I replaced was a good thing cuz you can definatley tell the difference. . . . Anyway. . . Fixed!
Parts Used:
Replacement Ice Maker
  • andy from ANNANDALE, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
I quit making ice
Online I learned how to diagnose the problem and order the part I needed. Replacement was simple and now we have ice. It works perfect, no adjustments needed.
Parts Used:
Replacement Ice Maker
  • Eric from Sheridan, WY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker started leaking water until I had a large iceberg and no cubes
Spent six hours melting the ice berg, twenty minutes cleaning things up and ten minutes replacing the ice maker. The video was great the only piece of information that was missing was a statement that it may that several hours for ice to be produced. Thanks for the prompt and courteous support during ordering, a good product and support video.
Parts Used:
Replacement Ice Maker
  • Douglas from Malabar, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the IX5BBEXDS00
511 - 519 of 519