GU940SCGB2 Whirlpool Dishwasher - Instructions

Just followed your video and voila!! With an ailing husband and other expenses, You saved me at least 100.00 service call. Thank you parts select..

Turned off the electric. Opened the dishwasher. Removed the silverware tray. Removed the inner panel. Removed the wiring cover. Replaced the fuse and wires.

Opened the box and installed the basket. I thought the item would take 5-7 days and it came in 2 days. I am very happy.

Watched a video online. Watching this video made me buy the parts. Very helpful. Unscrewed the spray arm, replaced the spray arm seal and wash arm bearing ring on the lower portion of the dishwasher. Removed the upper rack (per instructions on the video), unscrewed the upper spray ring and replaced the seal. Also cleaned the filter and removed debris from the spray arm. Dishwasher cleaning well again.

Followed the instructions in the online video at Parts Select website. Couldn't have been easier. Delivery service was also very prompt. I was very pleased.

The top ring was missing and new nuts kept breaking. New plastic ring on top did the trick.

Unscrewed the lower rotating wash arm. Removed old wash arm bearing. Set in new spray arm seal. Replaced rotating spray arm. Dishes are now cleaner.

I removed the old nut and the wash arm, cleaned the screen, clipped the plastic circle into the arm, placed it on top of the screw and screwed in the new nut. Works great, nice clean dishes, and......no noise at all. Did this all myself, and ordered the part from you. The old nut was stripped. I almost bought a new dishwasher.

Removed two screws, disassembled sprayer arm and mount, replaced with new units, replaced one screw and was finished.

if the top rack on your dishwasher is not coming out clean ......and you are looking for a solution...this is prop. it....easy....very easy.......upon taking a look at the fan under the rack i noticed it was cracked on the seam....the new one works perfect....easy to install....and this part showed up at my house within two days of ordering.....as far as it goes easiest home project ever.

removed door cover,removed board cover and with needle nose plier remove fuse harness and replace with new one that simple once you determine damage part to replace.

Replaced broken arm holder using screwdriver

I watched the video and went to work on the project. I did come to a moment when I thought the mount component was different on my system relative to the replacement, but one more quick look at a point in the video and I was ready to finish the job. By the way, it was good to see even the demonstrator had a wee bit of a struggle with the stop clips. :o)

It was really easy. I took out the top rack, unscrewed the sprayer from the rack, screwed in a few items and snapped the thing into place. It was easy. If I were competent, the repair could easily have been done in under half an hour. It did not help having my wife and children laughing at me as I bumbled through everything,

Took inside door panel off. replaced spring that opens soap dispenser lid during cycle. Put inside panel back on. Works fine now.