GHW9200LW0 Whirlpool Washer - Instructions

Need to elongate the hole in the frame to allow the screw that holds the valve in place to be inserted. You could not even start it as is. Also it put pressure on the valve so it would not seat properly. Need to include in the instructions you may need to elongate this opening in order to complete this repair. Other than that is was extremely easy. Parts fit well. Video instructions were great. Other than not knowing about the valve screw placement changing both pieces were extremely easy. Washing machine was repaired within minutes and is functioning properly again. Even the diagnosis tool was excellent as I have no experience with repairing washing machines but your site helped me trouble shoot the issue, order the parts (and receive in a couple of days) and replace the defective pieces in minutes. Changing these 2 items got me up and running an days and cost significantly less than what a repairmen would have charged just to show up at the door. Appreciate all your help!

removing the old srews was a little difficult but once it was done it was much easier to replace the new product.

Using just a screwdriver it took less than 5 minutes to repair...way too easy! Voila I was back to doing laundry...guess that makes me happy? Back in the day I would have just bought a new washer because I never realized how easy some repairs are...and I now have a happy hubby too!

snapped in place

Shut water off to washer, unhook hoses, removed back panel of washer, removed screw that holds the valve in place then unhooked the water line that connects to the washer and removed part. Place new inlet valve in position and hooked hoses and mounted it in place, put back panel back on and hooked hoses up and turned water on. Did a test wash and it worked

so easy!!three screws to take top off,one screw held valve in take hose off then install new part and reverse take apart order and done!!!Would have been sick if had to pay service call for such a easy fix!! Mike

After an effortless process with PartSelect with locating, purchasing and receiving the replacement handle in three days, I removed the broken handle by removing two star type screws and removed the broken handle. I placed the new handle in the appropriate location and reinserted the two screws, tightening same. DONE. I will not hesitate to use PartSelect again in the future as the service provided is as great as thier webpage indicates they are. A wonderful shopping experience from beginning to end.

First I removed the two screws that hold the handle in place. Replaced the handle.

Removed screws from broken door handle, placed new handle, replaced screws. Couldn't be easier

I removed both screws form the broken handle.
I then removed the rubber strip and replaced it on the new handle. I put the 2 screws back in and I was finished.
I did it all myself without the help of my husband.

pulled old broken knob off and removed metal clasp on knob stem. Then pushed new knob on in seconds and worked fine. Of course wife was inpressed just complained about the knob color, but can't do everything perfect!

easy as pie - ordered part. arrived in a few days and popped it back on. easy as pie. great service, quick! will definitely return to buy other parts!!!

Unplug machine,remove three screws that hold on top cover.
Unplug latch switch assembly,then open front door of washing machine, remove three screws which hold latch
switch. Install in reverse order.

Pulled off the broken knob. Fairly disgusted with Whirlpool for not bothering to put a metal / aluminum sleeve inside to avoid the exact breakage I experienced. Part Select, however, had the part, got it to me exactly in the time frame I asked for and it was the correct part. I would definitely use Prat Select for any such need.

This was an easy fix . PartSelect was quick and had all the info I needed to repair my washer. Plus shipping was super fast. Thanks