GDG19CT Maytag Dryer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
lint filter torn
-
Larry from Mount Vernon, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
replaced the worn tumbler belt
In addition to removing front of dryer, had to ultimately remove the access plate at rear of machine to thread the belt. Found aligning the belt to be a bit of a chore as the belt wanted to ride in the groove on the drum which didn't align with the motor pulley. Didn't have the correct wrench for the four sheet metal screws that held the rear plate and had to use pliers. Patience finally paid off and the machine is back in action.
Parts Used:
-
Thomas from Malone, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
tub support pulley worn out
followed directions from the video, helped very much
Parts Used:
-
Scott from Waterford, CT
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
very squeaky dryer under load
My take apart, fix-it son, Had it all apart and fixed in under 2 hrs. Thanks for quick delivery.
Parts Used:
-
Dianne from Pembroke, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
Was this instruction helpful to you?
Thank you for voting!