Models > GCAM2792TQ0 > Instructions

GCAM2792TQ0 Whirlpool Washer - Instructions

All Instructions for the GCAM2792TQ0
1381 - 1392 of 1392
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
agitator not move
I order the repaired kit and I use the old part where the dog cam goes due to the new one is loose.
Parts Used:
Agitator Cap Barrier with Seal Agitator Repair Kit
  • Nelson from Silversprings, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Agitator cogs replaced
Exactly as described in the sample video on your site.
Parts Used:
Seal, Inner Cap Agitator Directional Cogs
  • Scott from Mooresville, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Slow agitator
Half inch ratchet extension unscrew remove replace cogs reinstall retainer ring drop back in . Watch how fast agitator spins.
Parts Used:
Agitator Directional Cogs
  • Steven from Aurora, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Hoses were decayed.
Removed the washer enclosure, removed the hoses, cleaned everything, installed the new hoses, reinstalled the enclosure, test run the washer and it's working now.
Parts Used:
Drain Hose Break Hose Tub-to-Pump Hose Kit
  • Jeff from Henderson, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Top half of agitator "Free Wheeling"
I viewed the repair video provided and then dove into the project. I am sorry to say that the time suggested for the fix was a bit misleading. Took me less than five minutes rather than the fifteen minutes suggested. Thanks Parts Select for a great assistance in saving me an expensive repair call!
Parts Used:
Agitator Directional Cogs
  • Paul from Maple, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
washer push button control switch burnt:
removed burnt switch , installed new control switch dressed wires two screws . plugged washer in tested switch worked okay.
Parts Used:
Push Button Switch
  • MarkMcElveen from Kingwood Dr., TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Top part of agitator was inoperative
I looked at the video that was available for a general idea. I knew the exchange was fairly simple but it never hurts to watch someone else explain it. Used my socket and extension, some lube as recommended, replaced the pieces, tightened and turned the washer on. Worked like a charm. Thanks
Parts Used:
Agitator Repair Kit
  • William from Springfield, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
water leak in under washing machine towards the front
Disconnect water supply hoses, water drain hose, power cord. Move washer into position to lay on it's side. Use pliers to remove hoses on direct drive. Pull direct drive away from electric motor, replace with new direct drive. reconnect washer in it's place. done.
Parts Used:
Direct Drive Water Pump
  • Raul from Round Rock, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
would not agitate
watched a utube vidieo and followed directions in repair kit poped the cap removed screw seperated agitator replaced worn parts reasembeled agitator simple
Parts Used:
Agitator Repair Kit
  • Rick from Galva, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
no spinning agitator in top portion.
took broken agitator dogs out and put new parts in, it was very easy repair.
Parts Used:
Agitator Directional Cogs
  • jung from river vale, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
water pump was leaking
It went very easy and the part was right very easy job to do saved a lot of money thanks to you thanks a lot
Parts Used:
Direct Drive Water Pump
  • donald from berryville, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
top 1/2 of the agitator would not agitate
exactly like the instructions that came with the new parts said. they were very accurate.
Parts Used:
Agitator Repair Kit
  • ROBERT from UNION, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Socket set
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GCAM2792TQ0
1381 - 1392 of 1392
Back to Top