All Installation Instructions for Whirlpool Refrigerator GB1924PEKW3

The Rail broke

Removed the storage bins. Removed the whole shelf, remove the glass part.(clean everything while you are at it, which is why it took 15-30 minutes) Lift out old rail and replace it with the new, reinstall shelf and glass. If you choose to not to clean, just take out the glass shelf, replace rail and put it back in. .

Parts Used:

Refrigerator Center Crisper Drawer Slide Rail - White

Bea from Grand Rapids, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

Was this instruction helpful to you?

Thank you for voting!

Left door light switch lost its spring

Unplugged appliance. Using a small putty knife I moved the switch out far enough to grab it with pliers. Moved wiring to new switch and pushed into place after testing.

Parts Used:

Door Switch

David from Fairfax, VA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

2012 maytag crisper frame shelf and rail broken

removed glass shelf then took broken frame out a cover and humidity levers had to be removed and put on new frame they don't come with frame it just sits inside the fridge on tabs then put crisper drawers in frame is all plastic and will break easily do not overload drawers not made to hold a lot of weight that's how mine broke

Parts Used:

Crisper Drawer Cover Frame

Refrigerator Center Crisper Drawer Slide Rail - White

William from Wilmington, MA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

Was this instruction helpful to you?

Thank you for voting!

Switch didn't work

followed the video as instructed. Saved two repairman calls, one to find the problem, one to install. Net savings was about $130.00

Parts Used:

Refrigerator Door Switch

Don from Laramie, WY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

Was this instruction helpful to you?

Thank you for voting!

exchange of defective light rocker switch

1)pry out the old/defective light rocker switch with a screw driver (flat head) and pull out the cables 2)unplug two connectors at the end of light rocker switch 3) connect new light rocker into two connectors 4)push the wires inside and put back new light rocker switch

Parts Used:

Refrigerator Door Switch

Steve from River Edge, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Plastic on glide support was cracked

Removed two screws, replaced slide, put same two screws back in. Install drawer back in fridge. As my daughter would say, "Easy Peasy Lemon Squeezy."

Parts Used:

Glide - Left Side

Deli Drawer Glide - Right Side

Debra from San Jose, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Light in the refrigerator didn't work

I did exactly as the video showed. I popped out the old switch, disconnected the two terminals, connected the new switch and put it back. The light now works! The refrigerator is over 25 years old and the switch works! What a great website this is. Couldn't of done the job without Partselect's help.

Parts Used:

Refrigerator Door Switch