FRS6LR5EM2 Frigidaire Refrigerator - Instructions

First I removed the Item out of the trays located on the door Then I removed the two screws that held the door in place> Lift the door of its location lay it on a flat surface. Counter top on a drop cloth. Remove old broken bearing< install new bearing. Replace door, install screws. Like new. I am a female and I was very proud of myself.

I followed the directions given on previous posts and it was no problem. My husband was out of town so I did it all by myself. The only tool needed was a Phillips head screw driver. Piece of cake!

I removed the drip pan in the ice/water well. Then I removed the 3 screws holding the front control plate and disconected the front control from the ice/water dispenser.

I then removed the ice/water dispenser by removing 3 screws, disconecting the wire block and removing the water hose.

The actuatior was easily replaced (4 screws) and I reversed the whole process to put everything back together.

One other note, the actuatior had been redesigned and the replacement seems to be much stronger than the original... shouldn't have to do this again.

just replaced the old broken one and put the drawer back .

I used a flat head screwdriver to pry open the front of the socket as I pushed the socket toward the freezer side. I unplugged the two wires connected to the socket then re-connected the two wires to the new socket and popped the new socket back in. I then put a new light bulb in and we had light again in the fridge.

was very easy. just ordered a new ice maker which was delivered in a few days. The installation was so simple. Just plugged the new ice maker in and hung the unit on the 2 screws. And then tightened the screws with a 1/4 in nut driver.

No big deal, just easy service and next day delivery at the 3-5 day price

the new ones clipped in very easily. it took 2 minutes and the shipping from this company was really fast. I ordered on Christmas Day and had the stuff 2 days later. this is, from my experience, a good company.

One screw to remove the old part, and screwed in the new one. Easy as pie. Keep the screw from the old part as the new one did not have one.

Replaced the drawer cover/shelf. Took the door off & put in the new plate....simple.

I pull out the broken part by push the center pin thru and then rerome all the parts. I then positioned the new part in place and push in the center pin to lock. quick and easy.

I couldn't find the part I needed online, so I called. The person I talked to was great--and found the exact part I was looking for. It was here in no time & I took it out of the box & popped it in the door of the refrigerator. It was so easy!

Replaced broken door shelf bin with new one.

My husband simply removed the hanger and replaced it with the new one. We were irritated we thought we were going to have to purchase a new frig. An easy fix at a great price!

Was the fastest repair I ever did in my life. I intially received the wrong part, but after 1 email I received the correct part the next day! Exchange was easy and with no hassles.