Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FRS6LR5EM2

FRS6LR5EM2 Frigidaire Refrigerator - Overview

Get Parts and Repair Help for FRS6LR5EM2

If you know the refrigerator repair part you need, you can browse the list of all parts on the FRS6LR5EM2, or you can search by name or part description. You can also find your part by where it is located on the FRS6LR5EM2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for FRS6LR5EM2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$25.45

Door Bin

Door bins, also known as cantilever shelves, are storage bins located on the door of your refrigerator. Over time, a cold refrigerator can cause plastic to become fragile and break...

$4.15

Crisper Cover Support - Front

This crisper cover front support is used to keep the crisper shelf in place, and may need replacing if the door will not open or close. This part can be used for the front support and mounts to the inside cabinet wall. Replacing this part is an easy repair, and will require a small flat blade screwdriver, a putty knife, and a soft hammer. Remove the crisper and shelf from the refrigerator before replacing the support. The crisper cover front support is held in place with a locking pin. To remove the old part, you will first need to push the pin into the interior of the cabinet using the screwdriver, and then you can pull the support out with a putty knife. After removing the pin and attaching the new support, simply use the soft hammer to lock the new pin in place.

$60.81

Water Inlet Valve

The water inlet valve releases water from the supply line when activated, and sends it through to the water dispenser in your refrigerator. To make this repair you will need an adj...

$32.61

Door Shelf

This door bin is 11 inches long by 5 inches wide. It can be used in the freezer or refrigerator and is white in color and made of plastic. If your door bin is damaged or missing, you can replace it with this part. The door bin snaps into place so no tools are needed for this repair.

$4.33

Crisper Support - Rear

Replacing the rear crisper support in your refrigerator is an easy job. This part is made from plastic and mounts on the inside of the wall. To complete this repair you will need a...

$39.69

Door Bin

This door bin is a manufacturer-approved replacement part for your refrigerator. It is 1 gallon in size. No tools are required for this repair. Simply remove the existing door bin and snap the new one into place.

$29.11

Meat Drawer Rail - Right Side

As you look into the fridge, this drawer support track is located on the right-hand side. This item is white in color and made of plastic. The drawer support track can wear out ove...

$58.56

Upper Crisper Drawer Cover - Glass NOT Included

This upper crisper drawer cover is a manufacturer-approved replacement part for your refrigerator. It has drawer glides molded into the frame but this part does not include the glass cover. To replace this part, lift out the glass cover and snap out the drawer frame. Snap this new frame cover into place and replace the glass.

$41.76

PureSource Replacement Filter

Manufacturer's Number: WFCB The PureSourcePlus filter fits refrigerators made before 2001, and Kenmore refrigerators with model numbers starting with 253. This filter has white end...

$8.63

Hinge Bearing

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Aged parts broken

  • Customer: Erik from Evans, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 674 of 701 people found this instruction helpful
After sitting in a cold refrigerator for year after year, plastic becomes brittle and breaks. This is what started happening to my shelves and door bins. The problem a lot of times is getting the right part since some of the parts do not have numbers.

This website gives a accurate description and best of all photos on an inch grid, so I can measu... read more

cracked, broken door bins

  • Customer: Beverly from Jackso, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 509 of 528 people found this instruction helpful
The new bins and I installed them in the door. Nice to have door space again. read more

Water in Frig was tasting bad.

  • Customer: Patricia from Fulton, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 491 of 493 people found this instruction helpful
I turned the cap for the old filter and pulled it out . Then I put in the new one in and turned the cap to secure it in frig. read more