FRS6LF7JS0 Frigidaire Refrigerator - Instructions

I took out the drawer, then the whole shelf. I unscrewed the track that was broken and screwed in the new one. I then, put the shelf back in the fridge and put in the new drawer. All works awesome!!!
Thanks PartSelect for getting me the parts I needed so fast!

1-Remove upper plate with phillips screw driver (6) screws 2- remove upper hinge plate with ratchet and socket (2) bolts 3- lift door off bottom cam, lay door flat on floor. 4- Remove broken cam on lower part of door, just pull out. 5- Install new cam in bottom of door 6- raise door up, set on cam, reinstall top bolts and screws 7- p. S. Make sure you trace top hinge location with a pencil before removal, so installation has proper location.

Slid it over the grooves and I was done. Took less than a minute!

Removed the broken bin and slid the new bin into the bracket on the door.

slid the new clips onto the door holder. I took 2 tries before it stayed on as it was a little tricky but not too tricky.

Slipt bin on the proper place, no tools needed.

All I had to do was slide the bin in place. I ordered two
because I had another space that I could put a bin and it
added room in my refrigerator.

Simple, I had a repair man come over and diagnose the problem. After confirming, I ordered the part and replaced it. Need to make sure you get the ice build up out of the fitting tnat goes from the back of the fridge connection at the top and the filler tube inside the unit, mine was iced over. Repair man wanted to charge me $250.00... with his service call and buying the part, it cost $120

I read other comments and most suggested the fix is less than five minutes and a couple tricks (push the remaining piece into the frig if you can't pull out with pliers)and I did exactly that. Parts came in 2 days, repair took 5 minutes - it took longer to open the package. My wife thinks I'm a star!

Remove new bin from box
open door
insert bin in door ensuring that clips are lock in on the side
done.

I took out the old filter and put in the new filter. I ran some water through it and it was done.

Just slipped it on.

Slid the new door bin between the brackets

Removed the old, installed the new one and finally figure out we had to press the reset button.

Plastic bin