Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FRS6LF7JS0

FRS6LF7JS0 Frigidaire Refrigerator - Overview

Get Parts and Repair Help for FRS6LF7JS0

If you know the refrigerator repair part you need, you can browse the list of all parts on the FRS6LF7JS0, or you can search by name or part description. You can also find your part by where it is located on the FRS6LF7JS0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for FRS6LF7JS0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.15

Crisper Cover Support - Front

This crisper cover front support is used to keep the crisper shelf in place, and may need replacing if the door will not open or close. This part can be used for the front support ...

$37.94

Bottom Door Bin

This bottom door bin, also known as a cantilever shelf, is a manufacturer-approved replacement part for your refrigerator. It is made of clear plastic. No tools or additional parts are needed to install this door bin. Simply snap the mounting tabs into place.

$60.81

Water Inlet Valve

The water inlet valve releases water from the supply line when activated, and sends it through to the water dispenser in your refrigerator. To make this repair you will need an adj...

$32.61

Door Shelf

This door bin is 11 inches long by 5 inches wide. It can be used in the freezer or refrigerator and is white in color and made of plastic. If your door bin is damaged or missing, you can replace it with this part. The door bin snaps into place so no tools are needed for this repair.

$4.33

Crisper Support - Rear

Replacing the rear crisper support in your refrigerator is an easy job. This part is made from plastic and mounts on the inside of the wall. To complete this repair you will need a...

$29.11

Meat Drawer Rail - Right Side

As you look into the fridge, this drawer support track is located on the right-hand side. This item is white in color and made of plastic. The drawer support track can wear out over time. The only tool required is a Phillips screwdriver. Empty out the drawer and remove it by sliding it forward. Lift out the shelf, remove the screw on the side of the shelf, remove the rail by pushing the rail forward and snapping out of place, insert new rail, and install the screw back in. Now the shelf can be put back into the refrigerator. The mounting screws are sold separately.

$53.89

Water Filter

This is a water filter used in refrigerators to remove impurities and particles from water that goes through the water and ice dispenser. If your icemaker is not making ice, not di...

$58.56

Upper Crisper Drawer Cover - Glass NOT Included

This upper crisper drawer cover is a manufacturer-approved replacement part for your refrigerator. It has drawer glides molded into the frame but this part does not include the glass cover. To replace this part, lift out the glass cover and snap out the drawer frame. Snap this new frame cover into place and replace the glass.

$8.63

Hinge Bearing

Sold individually.

$100.41

Ice Maker with Cover - 8 Cube

This Frigidaire ice maker includes the ice mold and control device. The ice maker receives water from the water inlet valve and stores water in the ice mold until it freezes. Ice is automatically ejected and the process continues until the storage bucket is full. Your ice maker should be replaced if ice is not being generated, stored, dispensed, or the ice maker has been damaged. Replacing the ice maker is an easy job and only requires a 1/4 inch nut driver. Before you start this repair, make sure your refrigerator is unplugged. For help with this installation, check out the video below.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

yearly maintenance

  • Customer: Antonio from Folsom, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 599 of 630 people found this instruction helpful
swap filter read more

Tab on bottom door bin broke off

  • Customer: Mark from Redlands, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 523 of 541 people found this instruction helpful
Replaced bottom door bin being careful not to put stress on the tabs to fit into molded area in door. read more

freezer shelf broke

  • Customer: MONICA from LANCASTER, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 489 of 502 people found this instruction helpful
Easy slide it back in place read more