Models > EIDW5905JS0A > Instructions

EIDW5905JS0A Electrolux Dishwasher - Instructions

All Instructions for the EIDW5905JS0A
31 - 44 of 44
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The brackets on the lower rack had worn out and not holding up the tines.
The parts came in a timely manner and took about 15 minuets to replace with no tools.
Parts Used:
Tine Bracket
  • Alan from Gladstone, OR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spray arm broke
Popped off old remaining part. Popped new one on. Super easy.
Parts Used:
Upper Rack Assembly - T3 PRO
  • Jill from Fort Wayne, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Silverware basket worn out and had holes
The replacement basket fit perfectly.
Parts Used:
Silverware Basket
  • madalyn from Grand Prairie, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
No water flow
Changed out Motor and Pump also canged out control box but no joy
Parts Used:
Circulation Pump and Motor Assembly
  • Craig from Yuma, AL
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Was this instruction helpful to you?
Thank you for voting!
The spray arm center moving part was broken off the stationary part.
I used a screwdriver to pry the Spray Arm Center snaps loose from the top drainer basket, and the same screwdriver to pry the Spray Arm Center into position. Job done..!!!!
Parts Used:
Upper Rack Assembly - T3 PRO
  • David from Toledo, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
was not washing dishes good. rubber gasket was all soft like putty didn't seal
took old arm off and put new one on. very simple
Parts Used:
Upper Rack Assembly - T3 PRO
  • Gary from Brighton, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
silverware basket cracked and broken--utensils falling through
received part the next day. great service
Parts Used:
Silverware Basket
  • Mary from Garden City, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
dishes where not getting clean
I ordered the part and snapped it into place without any problems. I didn't even have to take the rack out to do it.It took about 4 mins.
Parts Used:
Upper Rack Assembly - T3 PRO
  • Jessie from Covington, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Silverware basket - holes in bottom
Dropped in new basket
Parts Used:
Silverware Basket
  • William from Lake Orion, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
None
This was just a basket you slide in and out. No installation required. Price was right and quick deliverly.
Parts Used:
Silverware Basket
  • Thomas from WILMINGTON, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dispenser would not dispense.
Removed 4 screws on door cover, 6 screws on dispenser 4 wires and reinstalled new one. Done less than 20 minutes.
Parts Used:
Detergent Dispenser
  • Johnie from Aztec, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Portions of the bottom of the center basket melted out not long after purchase.
The entire assembly drops into place.
Parts Used:
Silverware Basket
  • Alan from Winterville, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Arm Broke
First I tried to pry the arm off the basket with a screwdriver. Then I googled it and there were the simple instructions, and I followed them, pull to take off, to put on push after aligning arm on basket til it snaps on.
Parts Used:
Upper Rack Assembly - T3 PRO
  • Hope from Garland, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Silverware basket developing holes due to age and crystaliization.
Took the new Silverware Basket from the box. Opened door to dishwasher, removed defective Silverware Basket, put new Silverware Basket in its place.
Parts Used:
Silverware Basket
  • Robert G from Merced, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the EIDW5905JS0A
31 - 44 of 44