ED5VHEXVQ01 Whirlpool Refrigerator - Instructions

removed old parts from bin and installed new bin

I printed your diagram of the complete assembly for reference when installing the new part. I was able to get the part number from the diagram and ordered it online. I received the new part in 2 days. I removed the ice from the ice maker's bin and kept it in the freezer. I removed the old drum and auger from the ice maker assembly and installed the new drum #4388736. I looked at your diagram to make sure I had all of the blades in their right orientation. After the drum and auger assembly was installed, I placed the ice that I had saved into the ice bin and slide it back into place. I then tested if the assembly would now drop ice and also if it would crush the ice, which i do not use very opten, because I know that using the ice crush mode will prematurely wear the drum assembly. The drum and auger gets much more stress when it is crushing ice. After the icemaker worked flawlessly, I rolled the refrigerator back into its regular position along side the cabinets. I was very pleased with the part and the excellent service that PartSelect.com provided. The price was less than I thought I would have to pay. Also, the company provides most of the individual parts of the ice maker assembly. Normally, when I would shop at a designated Whirlpool distributor, I would have to purchase the entire assembly costing 3 or 4 times higher than the price of the individual part. I, will now, always purchase my parts from PartSelect.com.

You guys have this for me the next day

My son took a plastic panel off the top front of the refrigerator. He found what looked like a four by four mother board type part. After looking at it he seen there was a part on it that definetly looked burnt.I got on the internet and did a search and found your site. I took a shot in the dark that this was what was wrong, looked up the part and ordered it. I had the part in two days. He installed it and BINGO, the refrigerator now works fine. Thank-you for all of your help and fastness on the delivery of the part! :) AWESOME!!!!!!!

Watched the video on your site and did just as it said. The video was a great help.

old drawer out - new drawer in how easy can it get????

removed door and replaced the two parts

All you need is nut driver. Top hinge has 3 screws. Once you remove the screws, lift door. It is light. I place door of my sofa. I removed screws and pried the cam insert with a spatula. You can also you flat screwdriver. I also replace the other piece located at bottom of refrigerator. Now place door back onto metal rest. May need someone near floor to guide you. Once on the rest, close door and replace top screws. Forgot to mention that I emptied door shelves before removing door.

Removed the door, removed the old lower door cam, and replaced with new cam.

Followed the Partselect instructions - removed door, removed old cam and replaced with new cam. One lesson learned. There are two cams - one that sits on hinge below door and one that is up inside bottom of door. If you are replacing one, replace them both.

Toughtoget the ta b into the paddle but once in it was ok.

I removed the door and switched out the cams on the bottom. Super easy. Door closes perfectly now.

Wash, dry, insert.

The Crisper Pan ordered through PartSelect was a perfect replacement. The item ordered arrived quicker than expected. I'm very pleased with your service.

I did the repair, but apparently there's an Ice Door Kit with Bracket ( Part #8201756 - PartSelect Number PS990120 ) that has a metal bracket that will actually fix the problem with the broken plastic that holds the pin in.