Models > DGHS2634KB0 > Instructions

DGHS2634KB0 Frigidaire Refrigerator - Instructions

All Instructions for the DGHS2634KB0
556 - 570 of 577
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken crisper supports
I followed the video instructions from your site and it couldn't have been easier.
Parts Used:
Crisper Support - Rear
  • Kyle from Howe, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Freezer side kept defrosting
After receiving the parts, I clamped on the connector ends, and put on the shrink tubes. Unplug frig, took out the shelves (4) screws, unscrewed back panel (4) screws. Took old thermostat off tube, clipped (2)wires on old thermostat, splice wires, clamped connector on old wires, moved up shrink tubes, and used a heat gun to shrink the wires. Put new thermostat on the tube the old one came off of, put panel, and the shelves back. Pugged frig in. Works great!
Parts Used:
Defrost Thermostat Kit
  • Greg from Camarillo, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
The door shelf bin broke.
Ordered the new part. The pictures online were most helpful. Just compare the old part to the picture, place the order, wait two days, receive the package, open it and slide the new part in place. Very easy.
Parts Used:
Door Shelf
  • James from Las Cruces, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
our crisper cracked
just insert the new crisper 1-2-3 done!
Parts Used:
Refrigerator Crisper Drawer
  • Barrie from cleveland, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
water to ice maker
electrical unplugged. water turned off and disconnected. cardborad backing off (4 screws). removed part (2 screws). unplugged electrical connections. removed each line one at a time and inserted into new part, connected electrical connections. placed new part with all connections back onto refrigerator, (2 screws), backing back on, water line connected, and electrical connected. no leaks with new part. simple uninstall and install for do-it-yourselfer. instructions need to be printed in larger font for easier reading.
Parts Used:
Refrigerator Water Inlet Valve Water Tube
  • dennis from reserve, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
The Shelf Backets Were Broken
We unscrewed the old brackets, screwed on the new ones (with the old screws)and put the shelf back in the fridge! It took longer to take all the stuff off of the shelf than to do the repair.
Parts Used:
Meat Drawer Rail - Left Side Meat Drawer Rail - Right Side
  • PAT from IN, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Needed To Replace A Freezer Door Shelf
The ordering was a breeze! The part arrived within 3 days! And it fit perfectly within 30 seconds of getting it out of the box!thanks for a great service experience.
Parts Used:
Door Shelf
  • Jennifer from La Crescenta, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
drawer frames were broke
replaced them with the new ones
Parts Used:
Crisper Drawer Cover - NO Glass Upper Crisper Drawer Frame
  • Denise from Claremore, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
2 Fridge Door Bins Cracked
Took the parts out of the box and snapped them in place, package un wrap time and install time 7 minutes or less. Simple way easy! Aaa plus cust service, thanks ruben~vic & di
Parts Used:
Refrigerator Door Bin
  • Ralph from Kenosha, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
broken bin
snapped in the new bin
Parts Used:
Door Shelf
  • Timothy from West Babylon, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Crisper Support Broke Off
I tapped in the peg like it showed in video and pried out with flat screw driver and hammered other peg in flush with part
Parts Used:
Crisper Support - Rear
  • Denise from Claremore, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
not working due to ice on coils
unplugged frig, removed shelves & inner lower back panel in freezer side, removed defrost thermostat from tube, cut the wires and spliced in new stat wires with provided wire splices crimped together and replaced thermostat on tube it has been a week and no ice so far??. this was after 2 trips by the repairman who replace the defrost timer board which was most likely good at a total of $160!!! still cheaper than $1000 for a new frig!!!!!!!!!!!!!!
Parts Used:
Defrost Thermostat Kit
  • terry from litchfield, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Broken Door Tray
Pooped the old one out and pooped the new one in.Item was in stock, very fast delivery.
Parts Used:
Refrigerator Door Bin
  • Bill from Vancouver, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The ice crusher flap was broken.
Took out the ice box, dumped the ice. Let warm up a bit. Then took out the housing and installed the new one. Works great. Saved a lot of money! Only took a couple days to receive the part. Great service.
Parts Used:
Dispenser Crusher Housing
  • Mary from Allegany, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Bottom bin broken.
Just slipped the bin in place. Very easy. Took less than 2 minutes
Parts Used:
Refrigerator Door Bin
  • Geraldine from San Jose, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the DGHS2634KB0
556 - 570 of 577