All Installation Instructions for Maytag Dryer DG608

Problem with dryer.

Someone thought it was rollers. It was not. Maybe motor. Will check out further. Thanks for good service, Cynthia

Parts Used:

Drum Support Roller Kit

CYNTHIA from East Haven, CT
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Wrench set

Was this instruction helpful to you?

Thank you for voting!

We were given an old but funtional dryer that had to be converted to use LPG

The Maytag dryer had a removable front panel so it took only about 15 minutes to remove the front, replace the blocking plug and orifice and reinstall the front panel. I gave the repair time as 30-60 minutes since I took the time to vacuum the interior and clean the flame sensor. Great instructions were included with the kit.

Parts Used:

Gas Dryer Conversion Kit - NG to LP

Georgia from Bridgeville, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench set

Was this instruction helpful to you?

Thank you for voting!

lint filter torn

took out old filter put new one in. fit perfect.

Parts Used:

Lint Filter

Larry from Mount Vernon, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

replaced the worn tumbler belt

In addition to removing front of dryer, had to ultimately remove the access plate at rear of machine to thread the belt. Found aligning the belt to be a bit of a chore as the belt wanted to ride in the groove on the drum which didn't align with the motor pulley. Didn't have the correct wrench for the four sheet metal screws that held the rear plate and had to use pliers. Patience finally paid off and the machine is back in action.

Parts Used: