Models > CSC20GASBWH > Instructions

CSC20GASBWH Hotpoint Refrigerator - Instructions

All Instructions for the CSC20GASBWH
391 - 405 of 479
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
the cam broke because of weight and age
I watched the video on the webpage and did as he did. it was quick and easy. didn't realize the importance of this little part until it broke
Parts Used:
Door Closing Cam
  • james from tryon, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
The drawer slide rail broke
Took out the broken one and replaced it with the new one.
Parts Used:
Drawer Slide Rail - Right Side
  • Pauline from Traverse City, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Freezer side door would not remain closed
I did exactly as the video instructed. Removed the top hinge bracket. Removed the door. Replaced the parts on both the door and the freezer, taking care to save and re-install the shims. I put the door back in place and installed the top hinge. I also lubed the hinge pins with very light grease. The door now works perfectly.
Parts Used:
Bottom Hinge Assembly
  • Bruce from Ore City, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bottom Hinge Assembly Install
The entire project was extremely simple with the help of your excellent repair videos. Parts sent with dispatch and with the video, had the repair accomplished within 20 minutes. Removed door, removed old hinge and the defective door cam, installed new hinge and cam, replaced door, job done. Nothing like having a company like yours as backup when problems arise. Thanks, John Orr
Parts Used:
Door Shim Hinge Door Hinge Shim Bottom Hinge Assembly
  • John from Lawrenceville, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
freezer cooling coils froze over, main refrigerator was warm
remover the control cover in the refrigerator compartment prided of the four prong defrost time and replaced, defrosted the solid ice on the freezer compartment with a blow drier, turned on the cooling timer to coolest level it started in a few seconds and has worked like new for the last three days.
Parts Used:
Defrost Timer
  • jeannie from phelan, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrigerator not cooling but ice built on the frezzer side
removed the back panel and removed the ice with hot water, changed the parts used the screw driver, very easy repair and saved few hundreds doing ot my self, thanks for online instruction,
Parts Used:
Defrost Heater with Thermostat
  • Aref from Kingwood, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Because the bottom hinge was worn out I couldn't close the door without lifting it first
After receiving the part (quickly) my son-in-law replaced the old one without any trouble. Thanks very much
Parts Used:
Bottom Hinge Assembly
  • Ruby from Riverton, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
defrost heater went out
changing the defrost heaters was very easy, but I had to defrost all the ice built-up first that took a while.The amazing thing was the fast service I got from PastsSelect.com
Parts Used:
Defrost Timer Defrost Heater with Thermostat
  • LeRoy from Elkhart, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
needed new light socket
Pulled out old socket.pushed in new one.
Parts Used:
Light Socket
  • Charles from Williamsburg, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
freezer coil frozen solid, warm refrigerator
removed freezer coil cover, removed four screws heating elements removed very easyand replaced easily, 7 days since part was replaced and no further problems.
Parts Used:
Defrost Heater with Thermostat
  • daniel from phelan, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
refrigerator stop cooling and coils froze up
Simply,took all shelves out,unscrewed back wall off of inside of freezer,defrost heaters are only thing wires are contected to,just unplug it unscrew 2 screws on each heater,replace in reverse order. very simple! Partselect parts were very reasonable and delivery was fast!!!! Thanks!
Parts Used:
Defrost Heater with Thermostat
  • Keith from Sulphur, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Strange noise when opening/closing right side door
Watched your video a couple of times, just to be sure I had the sequence down pat. The repair followed the video exactly and was completed in about 12-minutes. I was a bit leary whether I would be able to handle the door weight and alignment but it all went into place without any problems.
Parts Used:
Door Closing Cam Bottom Hinge Assembly
  • Benjamin from Plano, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broken cam riser on the bottom of the door
I ordered a cam riser for the refrigerator door. I watched the "how to" video the day I ordered the part. It took about a week to get the part, but I was ready when it arrived. The 'how to' video was a big help. It showed me how to take off the door and replace the part. The process was quite simple! Oh! Don't forget to turn the refrigerator on again!
Parts Used:
Door Closing Cam
  • Charles from Anaheim, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Hinge cam on bottom of door broke
Watched PartSelect video and did exactly as video said. Had finished product in less than 30 minutes.6 bolts and one screw.
Parts Used:
Bottom Hinge Assembly
  • Richard from New Boston, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
freezing up not defrosting
The vedio was great as a helping tool.Glad I got to watch it.
Parts Used:
Defrost Timer
  • John from Hampton, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CSC20GASBWH
391 - 405 of 479
Back to Top