Models > CDB4000TQ0 > Instructions

CDB4000TQ0 Magic Chef Dishwasher - Instructions

All Instructions for the CDB4000TQ0
121 - 135 of 192
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Water Seeping From Under/Around The Door
I opened the door and pulled the gasket from around the dishwasher. The gasket does not have any adhesive around it, so it pulled free almost immediately. The new gasket was pressed into place around the door and I was done. It couldn't have been any easier. I suspected it was the gasket when I saw pinched portions that did not return to the original shape and there were no visible cracks in the machine.
Parts Used:
Dishwasher Door Gasket - Gray
  • Nate from Fort Worth, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
soap lid missing
Replacing the pin with the spring is a little tricky, it was hard to hold it. And the little plastic pin breaks real easy too, its hard to get the lid to snap in place without breaking the pin.
Parts Used:
Wheel Assembly Spring, Lid Soap Dispenser Cover Rinse Aid Cap Pin (Lid Hinge)
  • Jim from Oktaha, OK
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
8 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
seals were leaking,dry rotted from setting five years without using.
I Disconected The 3' hose Behind Impellor.Unscrew Cap Holding Impellor In. Pull It Out, Replce With New One.Put It Back Together In Reverse
Parts Used:
IMPELLER
  • mike from seymour, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
2 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water was leaking ou the door
pulled the old door seal off and pushed the new seal into place and it works great!
THANK YOU!
Parts Used:
Dishwasher Door Gasket - Gray
  • ROSE from ELVERSON, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I broke one part trying to install
no tools necessary buy instructions would have brrn helpful
Parts Used:
Pin (Lid Hinge)
  • dwight from onaka, SD
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
front leak
pulled out the old gasket, aligned and pressed in the new gasket
Parts Used:
Dishwasher Door Gasket - Gray
  • Rod from Dripping Springs, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking around door
1-2-3 EASIEST JOB I EVER HAD to DO AND THE WIFE IS PROUD OF ME FINALLY.

THANKS , , ,Bat from WEST SENECA (Buffalo, NY)
Parts Used:
Dishwasher Door Gasket - Gray
  • john a from west seneca, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water leaked through door gasket.
Lowered door and put a weight on it to keep it open. with screwdriver pried out the old gasket. It was simple. looked at the end of the replacement gasket and inserted it into the track with the small hole down. Job Complete. about three minutes total time.
Parts Used:
Dishwasher Door Gasket - Gray
  • Charles F. from Burnet, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two of the upper dish rack assemblies were broken
I had attempted to solve the problem with another company; but, the parts did not fit. So, when I found your company, everything was easy. I ordered the parts. removed the damaged dish rack assemblies, and, and replaced them with the new parts. The dishwasher works great again.
Parts Used:
Rack Adjuster
  • James from Odenton, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leak in dishwasher
This was an easy fix. My husband took out the old gasket and put the new one in. It fit perfectly and no more leak. The part got to us really quickly too and that was nice. No more hand washing the dishes! :)
Parts Used:
Dishwasher Door Gasket - Gray
  • Carolyn from Keithville, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not cleaning like it should
Replaced old worn out parts with new ones.
Now it cleans like it should once again.
Parts Used:
Lower Spray Arm with Tower
  • Arnaud from FR SETTLEMENT, LA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Will not dispense soap
Remove old spring pin, spring, door
Waste of time effort and money didn't change a thing still won't dispense soap to wash dishes
Parts Used:
Spring, Lid Soap Dispenser Cover Pin (Lid Hinge)
  • D from Sadieville, KY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
2 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking
put new seal in and it still leaked!hum
Parts Used:
Dishwasher Door Gasket - Gray
  • Roy from matteson, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
1 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broke water inllet valve
disconnected the water, removed the old valve put in new valve and waah laah it worked .
Parts Used:
Water Inlet Valve
  • ANTHONY from MANITOWOC, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench set
2 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The detergent door won't open fully
Sorry, probably need a spring as the door is fine. While reading other stories about how hard the spring was to get right, I assumed the spring was part of the door assembly.
I'll be calling and returnint the part.



















i'
Parts Used:
Soap Dispenser Cover
  • Bob from Carlsbad, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    Less than 15 mins
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CDB4000TQ0
121 - 135 of 192
Back to Top