Models > BBBD2432KW0 > Instructions

BBBD2432KW0 Frigidaire Dishwasher - Instructions

All Instructions for the BBBD2432KW0
601 - 615 of 629
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Water leaking from the bottom of the door
Very easy project. The bottom gasket slides out very easily and inserts just as easy. Just make sure you push it in all the way. Tub gasket is also easy - lineup the mark on the gasket (shows where the center is) with the top door latch and run it in the insert on either side. Cut off the excess but make sure you run it all the way around letting a portion stick out horizontally at the bottom (too short and the door will still leak). Run a quick wash cycle to make sure it seals properly and you're done - no tools needed.
Parts Used:
Dishwasher Tub Gasket - Gray Dishwasher Bottom Door Gasket
  • Michael from Ridgewood, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
dishwasher door was leaking.
Pulled out the gasket,trimmed the gasket to fit and alittle pressure to put.it in place, very easyto do. No worries any one can do this and savek yourself costly repair person.
Parts Used:
Dishwasher Tub Gasket - Gray
  • Dean from Boscobel, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Leaky inlet valve
Cakewalk, replacing a water inlet valve is self-explanatory. Take the old one off, put the new one on .. that's pretty much it.
Parts Used:
Water Inlet Valve - 120V 60Hz
  • Lance from Chandler, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Water leaking from dishwasher
The bottom gasket was really delivered quickly for the Xmas season. Watched the online video for removing and replacing the Bottom Gasket. Five minutes later was loading dishwasher for the trail run. No leaks dishwasher back online.
Parts Used:
Dishwasher Bottom Door Gasket
  • Steven from Buffalo, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
leaking
Replaced bottom and tub gasket
Parts Used:
Dishwasher Tub Gasket - Gray Dishwasher Bottom Door Gasket
  • Juan from Cumming, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The dishwasher was leaking.
I replaced the bottom gasket and the tub gasket. replacing them both was very easy. I pulled the tub gasket out by using a screw driver and popping out a section then pulled it out. Installed new one by just pushing it in. Bottom gasket was simple as well. There was a notch in the gasket on the right side so you can't screw it up on which side goes where. Pulled the old one out and pushed the new on in. I found it easier to install the right side with the groove first. Both gaskets helped. However dishwasher was still leaking. Another person had mentioned that the spinner that shoots the water on the bottom, had a hole in it and was shooting water towards the door. I examined both of them and found that the bottom one had a bigger hole on the very end. It looked like it hit something and made the hole bigger. I temporarily put duct tape over it and it has't leaked. Plan on ordering the new part today.
Parts Used:
Dishwasher Tub Gasket - Gray Dishwasher Bottom Door Gasket
  • Michael from Noblesville, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Upper spray area had broken and kept flying off during wash cycle. Resulting in dirty dishes in upper rack
Got the parts, took out upper rack, placed on gasket and thoenscrewed on the upper arm by hand until tightened. Easiest repair I have done by myself and I do a lot of them! Thanks! Saved me a repair bill.
Parts Used:
Upper Spray Arm Delivery Tube Gasket
  • Marilyn from Burnsville, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was leaking water onto the floor
I viewed a very short video on how to replace the lower gasket on the website which was extremely useful. I then ordered the part via standard shipping and it arrived very quickly. I used the flat head screwdriver to gently loosen the old gasket which has mineral buildup on it and was stuck into place. Sliding the new one in was a snap. This was one of the best sites as you could search for the part by describing the problem. I would definitely use it again!
Parts Used:
Dishwasher Bottom Door Gasket
  • miles from hoboken, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Water leaking from the washer
R&R the tub gasket and the door gasket. Repair not effective, it still leaks.
Parts Used:
Dishwasher Tub Gasket - Gray Dishwasher Bottom Door Gasket
  • Charles from Mount Pleasant, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Water leaking from bottom center of door
Ordered a bottom gasket and replaced it. Started dishwasher and had same leak. Found out that the lower spray arm had a hole in it from the heating element and was spraying water directly at lower part of door. Replaced lower spray arm, problem solved!!
Parts Used:
Dishwasher Bottom Door Gasket
  • James from Pollock Pines, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
upper spray arm came off
ordered new one and put it on in about one minuet
Parts Used:
Upper Spray Arm
  • LOUIS from GRANBURY, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Lower Spray Arm Was Damaged And Not Washing Properly
Plied off old spray arm and pushed downard on new one and it snapped in place. That was very simple and took less then a minute.
Parts Used:
Lower Spray Arm
  • WENDELL from MESA,, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
dishes where not getting clean
I ordered the part and snapped it into place without any problems. I didn't even have to take the rack out to do it.It took about 4 mins.
Parts Used:
Upper Rack Assembly - T3 PRO
  • Jessie from Covington, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The upper spray arm in the dishwasher broke off.
After getting an upper spray arm locally that did not screw on, I ordered one from this site hoping it was a different one but when I got it, it was the same. Tried that one and no luck either. Called the local repair place and they sent out someone. He could not get it on either so finally called tech at Frigidaire only to find out they had changed the piping coming into the dishwasher. To get this part to work he needed to pull out the dishwasher and apply pressure from the top while screwing the part on. Then it went on fine. So $95 later and the cost of the part we finally have a working dishwasher again.
Parts Used:
Upper Spray Arm
  • Marcia from Perham, MN
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    1- 2 hours
Was this instruction helpful to you?
Thank you for voting!
dishes not drying -- water not heating
Took bottom panel off dishwasher -- used stubby screwdriver to remove bracket from old thermostat, intalled and connected new thermostat, replaced bracket -- easy. Parts schematic on website made locating and replacing part very simple.
Parts Used:
High Limit Thermostat
  • Judy from Miles City, MT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the BBBD2432KW0
601 - 615 of 629