79096011400 Kenmore Range - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
oven element burned out
removed the two screws holding the element in place, pulled the wire connectios off of each end, reversed the procedure and whala!! what an easy task, and I was just about ready to spend $556 dollars to buy a new stove, this part cost $23 dollars.
Parts Used:
-
Robin from Roseland, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
bake element burnt out
I unscrewed the two 1/4 in. nuts and disconnected both sides. I then reconnected the new element. Works great. Great price and fast shipping.
Parts Used:
-
David from burleson, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Switch was sparking
Took back cover off 2 screws held the switch then moved wires one at a time from old switch to the new one put everything back plugged in stove everything worked
Parts Used:
-
Marshall from Newport,, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
the lower replaced
to install the element was somewhat easy but turn the oven on there is no heat either on the upper or replaced element the light on the range shows it workings so it no doubt has an internal problem that will require a electrician in order to locate the problem due to the noise that i heard when the element went out-i am not surprised that it needs other work
Parts Used:
-
Madeline from Myrtle Beach, SC
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Burned out element
The DIY video on the PartSelect website was very useful as it showed how to do the repair without taking the panel off the whole back of the stove. It was a very simple repair being armed with the knowledge shown in the video.
Parts Used:
-
David from Mountain rest, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
burnt element
There was a video on here that give the simple instructions. Very easy
Parts Used:
-
richard from Smithfield, NC
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Heating element no longer worked.
Disconnect power cord, removed 2ea nut screws from inside the oven connecting heating element. Pull connectors thru the oven wall. Removed 1ea connector from each element connection. Replaced. Reinstall in reverse order.
Parts Used:
-
jimmy from grand prairie, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Heating Element burned out
This was an easy repair. I was going to call my appliance guy when I read how easy it was to replace on this site I decided to try it myself instead. It was that easy. I removed the old element and installed the new one in under 15 minutes. The video showed how easy it was that I had to try it myself and I am glad I did. I saved a bunch.
Parts Used:
-
Kristie from Nashua, NH
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Baking element split in half
First, I looked on you tube for a quick video on how to do the job. Next, I removed the old element by simply removing the two screws. Be careful not to let the wires fall back through the holes. Next, just plug in the new element and put the screws back. Simple! Last time the element broke I paid a repairman $185!!!!!! With shipping this time it cost me about $40!
Parts Used:
-
Christine from Ellicott City, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Replacement of bake element
-
Charles W from Southfield, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
No current to the burner
Checked the burner and no power to heat the burner. removed the old switch and put on the new one.
Parts Used:
-
terry from Pensacola, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Burners on high all the time.
-
Randy from Van, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Element broke in two
My husband fixed it in about 30 minutes or less. He said it was a piece of cake!
Parts Used:
-
NICOLLE from EADS, CO
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
baking element burnt out
It was so easy. We pulled the stove away from the wall and unplugged it. My husband used a nutdriver to unscrew the two screws holding the element in place. He unplugged the wires from it when he pulled it out. He plugged the wires to the new element, screwed it back in place and voila! I was ready to bake. So very easy.
Parts Used:
-
Deborah from Deatsville, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
broken bake element
-
MICHAEL from POINT PLEASANT, WV
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!