79096011400 Kenmore Range - Instructions

Remove bolt from both ends of element carefully as not to damage wires connected to the ends. Replaced with new element. Simple.

After making sure it was the switches themselves not the burners that were the problem, it was easy locating the exact parts I needed on PartSelect and the shipment arrived in a timely manner. I had to replace two out of four switches. Using a screwdriver, I detached the display pannel and removed the faulty switches. Then I disconnected the old wires and attached them to the new switches, one at a time. Closed everything up and the "new" range works great!

Turned off electric at breaker box for range. Using a socket wrench from my little pink tool kit, I removed the two screws holding the unit at the back of the oven. Gently pulled each side of the unit out, exposing the terminals. Holding with one hand and wiggling the terminal with the other, removed the element. One was very easy, but the other was harder. Next I connected the new element to the terminals. Gently pushed the terminal back into the oven wall and replace the screws. Last turned the electric back on and then turned the oven on. The video that was online was very helpful.

Thanks to the video on your web site, the replacement was very easy! We had a hard time removing the screws from inside the oven as we did not have a hexnut driver, but once we removed the screws then we lost one of the wires, (it fell back into the little hole) and then we had to remove the back of the oven to get the lost wire, push it through the little hole and we connected the new element, screwed it back in and then we baked some cookies.

My husband said it was easy he just unscrewed the two bolts he was through in no time. Thanks so much. I am so glad my over is working, it had been out for 8 month I am so glad my co-worker told me about you all.

Replaced the bottom element in the oven. Had to remove the 2 screws holding the element in place. Gently pulled the element loose and disconnected it from the wires connected to the oven. Connected new element to the 2 oven wires. Gently pushed the new element into the holes of the oven. Replaced the screws and I was done

Using a socket set, I unscrewed the original/broken heating coil from the back wall of the oven. I gently removed the screws holding the element in place and slid out the connecting wires from inside the oven wall. Then, I detached the wires from the original heating element and attached them to the new one. I slid the wires back into the oven wall, screwed the new element in place making sure both screws were tight, that's it!

Took 2 screws out pulled element forward, unhooked the two clipped on wires. Reattached wires on to new element pushed back into stove put the 2 screws make in, DONE! Really easy cheap fix thank you for the fast shipping and easy to do with video instuctions available item.

Just pushed the stove to the front unplugged it and unscrewed the old coil and connected the new one. It was very easy to do. I had ordered the same part last year from this company and kept the invoice so I knew exactly what I had to order. I use my oven quite alot so I guess that is why the bottom coil keeps burning out. Thank you for your quick shipping!!! I am one happy customer with a working oven once again.

I order my new part from you, I was very please with your severice,.... Great prices and next day delievery... Thank you so much When I need parts for anything I will be back,,,, Thank you .... Tammy

We orderes the hinge kit and replaced the bent hinges. The directions were easy to use (pictures really helped). The only issue was trying to remember where the screws went after we took it apart. Just a few moments of back tracking. Keep in mind we were working by flashlight. lol

Removed 2 back screws, lifted pan from rear and pushed front slightly forward/into oven until front lip cleared. Installed new pan in reverse order.

I removed two screws from inside the oven and pulled out the broken element and replaced with new one in just a few minutes,it was so simple!

After removing an oven rack to make room for the thanksgiving turkey roaster, I have NO IDEA, where I might have stowed it away! After searching every cabinet and every closet I realized I needed to do something quick for our annual christmas cookie marathon that would begin on Sunday. It was so easy to order the part, it arrived the next day, and we baked for 5 hours using the 3 racks in the convection oven. Dozens of cookies later... Thank you Parts Select!

Easy to put in but i droped a screw to hold the element. had to pull another screw to fix it