59673503200 Kenmore Refrigerator - Instructions

took old one out installed new turn left out turn right in

I pried the old one out with a screw driver and pushed the new one in. I expected instructions in the box it came in but there were none.

took the replacement part and removed to 2 salvageable parts from the leaking tray and installed the 2 on the new tray and then reinstalled the whole unit and we again have ice cubes.

I went on line looking for information on Amana Icemakers. Found a number of good sources,how to videos.Using the trouble shooting information I found and the how to videos and Parts Select part search to select the replacement icemaker needed for my Amana that was purchased in 1993.Rolled the frig out changed the leads on the water valve. hit the water dispenser and water went into the ice tray: Water valve good.Did a pre-teardown. Unplug Frig.removed ice bucket. removed three sheet metal screws making it easy to rotate ice maker and unplug the power/control cable. Old ice maker out ready to install new one. New icemaker arrives take ice bucket out, transfer on/off bail from old icemaker to new one attach power cable and in about thirty minutes icemaker is bolted in, fill tube in place and prefill ice tray to start the process. In afew hours we were making ice. pitched the first two harvests.Its working like a champ. Have plenty of ice. Very happy with the whole process.

Remove the glass shelve and the lower drawers. Remove the support rods front and back. Remove three screws from the end cap. Replace end cap and replace all other parts in order. Reattach the drawer cover by putting in one side and then bending the pivot slightly to insert the otheer side.

First had to remove pantry drawer, glass shelf and two drawers above shelf. Removed two nut head screws to remove right side end cap, on right side is a temperature adjustment device, that wrapped around back of refriderator. Had to rotate end cap and adjustment device like opening a door, this released the devise that holds temp adjustment devise to back of refriderator, figured out removal and replacment from end cap, also had to remove and replace drawerslide guide that attached to pantry end cap. ALSO had to clean everything, per wifes instructions. Put everything back in and repair done. Thought I would have to have a repairman out. Very gald to find this part online, Will use this site again.

My owners manual said to unplug fridge from elec outlet, use a kitchen knife to gently pry off the switch plate
(manual had a pictoral example), unclip the two wire, replace with on new switch and replace the switch. Close
door and plug back in. Open door to check that the lite
works. Walla! It did. Thanks!

Sincerely, Ron Marshall, Billings, MT

Used screw driver to pop out old switch. Used pliers to hold wire connection from fall back into slot on fridge. Inserted new swith into plug and pressed new switch back in place.

Easy site to locate your part. Arrived at my house quick and installed very easy. If I ever need another appliance part I will be coming back to partselect.com!

Removed ice maker.

Bottom freezer made access a tad awkward.

New unit did not come with wiring harness, or wire rod that activates cycle, or the front cover, which required transferring those items from old unit. Instructions on internet did not address this.

Installed new unit.

I also ordered a solenoid valve which solved the water dispenser problem. The vidio presentation on your website plus the personal experiences enabled me to easily install the icemaker which solved the leaking icemaker problem. Two small surprises, I thought the electrical wire plugged into the rear of the refrigerator and I didn't know that I would have to cut out part of the icemaker to accomodate for the refil tube. No problem on both surprises. Thanks

simple fix, remove and replace anyone with basic tool skills could do this. what prompted me to post here was the great service at parts select. website is very easy to use and their customers service reps are courteous and helpful. will use these guys anytime and highly recommend them. and did i mention the speedy delivery, had my parts in a couple of days. in the past i have waited for weeks from other parts houses.

Pulled out the meat tray drawer and crispers above and removed the sheet of glass between them. Removed the nuts holding the old pantry end cap and replaced with the new one. Replaced glass, crispers, and meat tray drawer. Very quick and easy. Delivery was unbelievably fast.

I pulled out the slide out drawer the shelf on top of it too a nutdriver and remove the broken panel while the daughter-in-law cleaned out the drawers. popped the new back in a srewed it back. It was so easy I could not believe it. I am 65 and a woman!!! I was done way before my daughter-in-law was finished cleaning. LOVED IT!!!!!!
Thank you so much for this wonder website. Barbara from lake worth,fl

Removed the chiller level and ice bin exposing the icemaker assembly.
Unplugged the icemaker assembly electrical connecter.
Used the nut driver to remove three screws that fasten the icemaker assembly to the refrigerator side wall and angle bracket.
Removed Ice tray assembly.
Reversed the steps to install the new icemaker.
Cured the problem.