Models > 55325119 > Instructions

55325119 General Electric Washer - Instructions

All Instructions for the 55325119
16 - 30 of 77
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broke theteeth off the stem of the dial so it wouldn't allow selection of start/ load size etc.
Part came in after a couple days and it was a simple push on to the stem and it was done! Not the most difficult fix. Getting the right part first time was the best part!
Parts Used:
Timer Knob with Clip
  • rob from SILVERTON, OR
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle plate would'nt turn
Pulled off the handle with the kneedle nose pliers replaced the plastic piece in that, then pulled off the plate that turns the machine on and just snapped the new one on. Only took seconds and saved alot of money. Considering just to have a repair man come to see what was wrong would have cost me $88.00.
Parts Used:
Timer Knob Clip
  • Karla from Boothbay Harbor, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer wouldnt start
just replaced the old knob
Parts Used:
Selector Knob with Clip
  • Catherine from Dunmore, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob broke
Pulled the old knod off and put the new knob on.
Parts Used:
Selector Knob with Clip
  • Mark from Miami, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The two dial buttons were broken on a white appliance. The dials sent were bone white.
Pull out old, insert new.
Parts Used:
Selector Knob with Clip
  • Wagdy from Watertown, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
On knob was broken
Removed knob and installed the replacement.
Parts Used:
Selector Knob with Clip
  • Roy W from Albany, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Start knob on dryer broken
There really is not much to explain, the new knob was so simple to replace that my six year old could have done it. No tools were required and it took less than a minute to replace the new knob.
Parts Used:
Selector Knob with Clip
  • Jessica from Spanaway, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
missing knob
the part fixed all the problems in a cinch
Parts Used:
Selector Knob with Clip
  • Linda from Levittown, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bdryer broken knob
I just put the new knob where the old one was and presto it was done. The whole process was much easier than I expected.
Parts Used:
Selector Knob with Clip
  • Julie from Portland, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Waher Knob Broke When Turning On.
First I had to remove old knob part from washer. Then I put the new one on. It was that easy,anyone could do it.
Parts Used:
Timer Knob with Clip
  • faye from reading, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken timer knob on ge profile washer
could not have been easier. It took a pair of pliers and a few minutes time to remove the remaining portion of the old knob from the spindle. Then simply push the new knob into place.worked perfectly
Parts Used:
Timer Knob with Clip
  • matthew from medfield, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
start knob replacement
plug new knob.
Parts Used:
Selector Knob with Clip
  • al from Cathedral City, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob broke
Easy. Pulled off old one slipped on new one!
Parts Used:
Selector Knob with Clip
  • Janis from northridge, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My husband broke the start knob, because he didn't know that you have to select the time and fabric selection first
Ordered a new knob and replaced the broken one.
Parts Used:
Selector Knob with Clip
  • Joanne from LaQuinta, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer knob had broken
Slipped the new knob on and inserted the clip and we were ready to wash
Parts Used:
Timer Knob with Clip
  • WALTER from SUMMERTON, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 55325119
16 - 30 of 77
Back to Top