Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Original terminal degraded and faulty
Turn off power, remove heat coil assembly and drip pan. Unscrew the terminal assembly from the range top. Cut back 3 inches on each terminal wire and strip insulation 3/8 inch. Terminal assembly should be with the short side of the black block (from the side securement hubs) facing toward the coil stems. Slide the shrink wrap onto each wire and Twist each old with each new wire using the wire nuts and slide the shrink wrap Over each. Using a hair dryer, heat gun, or open flame carefully shrink the wrap. Secure the terminal back in place on the range.
It was either fix the terminal blocks or buy a new stove. Our appliance man told us how we could do this ourselves and sent us a link. In the meantime I'd found yours, which was quite a bit cheaper and it too, came with a How To Video. Very easy!! All the parts fit and work beautifully and all for under a hundred dollars! We replaced two terminal block, one element and all 4 drip bowls! Nice friendly service!
Plugged the new one in and it worked. I did search out Frigidaire parts and there are other types tha may or may not work. Calrod burners are not all that unusual. I went with the real thing.
LOOKED FOR MODEL# OF STOVE.. ENTERED MODEL # IN PARTS.COM SEARCH. MATCHED COIL AND DRIP PANS ITEM NUMBERS AND SIZE. PLACED ORDER. ARRIVED FOLLOWING WEEK WELL PACKED. PULLED OUT OLD COILS/DRIP PANS. PLACE *NEW* DRIP PANS IN FIRST. THEN PUSH IN *NEW* COILS **NO PAID INVOICE WAS RECEIVED** Wed4/24/2024