Models > 10641562801 > Instructions

10641562801 Kenmore Refrigerator - Instructions

All Instructions for the 10641562801
571 - 574 of 574
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
door made clacking , thunking noise when opened
remove contents of door-----------hardest part of chore remove top hinge cover remove three top hinge screws remove door and lay on table remove two screws holding black plastic cam piece in door, remove black plastic piece (slightly held in by some type of mastic) just pull till it comes our insert new piece, insert two screws lubricate parts mount door on hinge pin insert tip hinge pin and plate and fasten with three screws attach cover............reload refrigerator door taking opportunity to throw out old bottles and mystery jars Finis
Parts Used:
Screw Lower Door Closing Cam
  • BILL from ADVANCE, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
replacement shelf w/glass and drawer
Removed old, replaced shelf and slid in new drawer
Parts Used:
Refrigerator Slide-Out Shelf with Glass
  • Gaylan from Gibbon, NE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Freezer side was defrosting food and ice build up, refer side too warm
I followed the UTube video step by step, pausing at each section made repair very easy. Watching the video is a definite must!
Parts Used:
Evaporator Fan Motor - 120V 60Hz Evaporator Fan Blade
  • Steve from Alhambra, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broken fan blade
unplug refrigerator, take backing off with nut driver. Pull old blade off and put new blade on. Put backing back on and plug in.
Parts Used:
Fan Blade
  • David from Ceres, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 10641562801
571 - 574 of 574