This genuine OEM refrigerator door gasket connects to the inner door panel. The gasket is the white rubbery strip that seals the space around the edge of the door to keep warm air out and cool air inside the refrigerator. When the gasket is not working properly, you may notice an excessive frost buildup or reduced cooling. You should look to replace the door gasket if it is worn, hanging loosely, cracked, torn, or not keeping a proper seal. This gasket measures 20 inches long x 2 inches wide. Remember when doing repairs on your refrigerator door to take everything off the shelves first.

This is a white door gasket for refrigerators. It is used to secure and seal the door when it is closed in order to trap cool/cold air inside. It is important to replace the gasket if defective or damaged to make sure that cold air does not consistently leak out, resulting in symptoms such as frost build up or longer running. For this installation you need a 4-in-1 screwdriver and an Allen wrench. Refer to the instructions provided by the manufacturer for further guidance and instructions.

This is a thermostat, also known as a temperature control thermostat. This part regulates the temperature. When the refrigerator reaches the desired temperature, the thermostat interrupts the flow of electricity to the compressor, which stops the cooling process. The thermostat may be defective if you notice that your fridge is exceeding the desired temperature (food is freezing). It may also incessantly run. This part is 3.4 inches in length, 3.2 inches in width, and 3.2 inches in height. The thermostat is located on the lower left side at the back of the appliance. Make sure you disconnect the unit from the power source before you begin.

This thermostat is also known as a temperature control thermostat and is used in conjunction with your refrigerator. The purpose of this part is to send power to the refrigeration system. By doing this it regulates the temperature within the refrigerator. If your appliance is not cooling properly or running continuously you may have a problem with the thermostat. To make this repair you will need a quarter-inch nut driver, a small flat-blade screwdriver, and a pair of needle-nose pliers. This model has been updated by the manufacturer; it may appear different, but will still function the same.