Troy-Bilt Lawn Tractor Parts

Clip-Hold Down (Nylon) – Part Number: 1724869099

Your Price

$10.77

Troy-Bilt Lawn Tractor Clip-Hold Down (Nylon)

★★★★★

1 Review

PartSelect Number PS9903766

Manufacturer Part Number 1724869099

Hold-down clips, also known as retaining, locking or fastening clips, are designed to secure and fasten specific parts within equipment, and the use depends on the type and model. This hold down clip is used to secure the chute of various models of snowblowers, and is sold as an individual OEM part, without any securing hardware. Made of nylon, this clip secures to the chute with two screws and two washers. If you notice a wobbly or insecure chute resulting in excessive vibrations from the chute, check to make sure the clip is in-place before inspecting it for damage and ordering a replacement. To replace this clip, you will need to gain access to the chute, with either a screwdriver or wrench, and once you can access it, it is as simple as unscrewing the old clip and installing the new clip and rest of the assembly.

Shear Pin, .25 – Part Number: 738-04124A

Your Price

$3.99

Troy-Bilt Lawn Tractor Shear Pin, .25

PartSelect Number PS9110822

Manufacturer Part Number 738-04124A

This individually sold shear pin is an OEM replacement that is most typically used in snowblowers but can also be used within snowblower attachments for lawn tractors. Its main uses are connecting the auger and auger shaft, which are the rotating blades, and to protect more valuable components such as the transmission.If the snow is causing excessive force or there is a jam within the auger and connected housing,it will cause the shear pin to snap, effectively stopping the rotation of the auger, while the auger shaft and gears will continue turning. If the shear pin snaps, snow will simply build up on the outside of the auger housing, since the auger will no longer spin. This shear pin has a .25-inch diameter, and 1.5-inch length and is sold individually. Most augers have a pin on each side, so you may need to purchase more than one, and it is also recommended that you carry spare pins in case of a future breakage.

Your Price

$11.22

Troy-Bilt Lawn Tractor Throttle Cable

★★★★★

1 Review

PartSelect Number PS10009725

Manufacturer Part Number 753-06831

Carriage Bolt, 5/16-18 x .75 – Part Number: 710-0451

Your Price

$3.99

Troy-Bilt Lawn Tractor Carriage Bolt, 5/16-18 x .75

PartSelect Number PS10001568

Manufacturer Part Number 710-0451

This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the nut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.

Nut, Flange Lock, 5/16-18, Grf – Part Number: 712-04063

Your Price

$3.99

Troy-Bilt Lawn Tractor Nut, Flange Lock, 5/16-18, Grf

PartSelect Number PS9092936

Manufacturer Part Number 712-04063

This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.

Chute Flange Keeper – Part Number: 731-0851A

Your Price

$4.99

Troy-Bilt Lawn Tractor Chute Flange Keeper

★★★★★

1 Review

PartSelect Number PS10005747

Manufacturer Part Number 731-0851A

This chute flange keeper is sourced from the original equipment manufacturer for use in snowblowers. The plastic keeper allows the snowblower chute to pivot, and secures the flange that connects the chute to the blower frame and holds it in place during use. Over time the flange keeper can break or fall off, which causes the chute to dislodge or shift from its position. If you notice that debris is discharged in the wrong direction, and you have difficulties adjusting the chute then this is a sign that the flange keeper is no longer functioning as it should. Clean the chute flange and surrounding area before placing the new keeper on. Use a pair of pliers to align the the holes on the flange keeper with the holes on the chute and lock it in place.

Oil Drain Sleeve – Part Number: 731-05628

Your Price

$7.99

Troy-Bilt Lawn Tractor Oil Drain Sleeve

★★★★★

1 Review

PartSelect Number PS9301040

Manufacturer Part Number 731-05628

Installation Instructions

Laurie from RICHLANDS, NC

Oil Drain Sleeve

I wish this was longer...it's only about 6", barely enough to have the oil flow past the metal plate of the riding lawnmower. I'm going to figure out a way to make a permanent extension something like this video would be SO much better https://www.youtube.com/watch?v=G9ZVoeqr6R8&t=79s Read more...