Roper Dishwasher Wheels and Rollers

Popular Roper Dishwasher Wheels and Rollers

Your Price
$29.36
  In Stock
Roper Dishwasher Upper Rack Wheel with Mount
★★★★★
★★★★★
59 Reviews
PartSelect Number PS11745451
Manufacturer Part Number WP8268655
This is a replacement upper dish rack wheel with mount for your dishwasher. The mount supports the dish rack, and the wheel allows the rack to slide out easily. To replace this part, remove the rack stops and pull out the upper dish rack. This wheel mount pops off, and the new one can be snapped into place.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Noisy
  • See more...
Installation Instructions
James from Gulfport, MS
The wheels on the upper dish rack broke
I removed the end caps on the slides with needle nose pliers, removed the old wheels and installed the new ones, then I snapped the slide end caps back on. Super responsive service from PartSelect.com Thanks! Read more...
Your Price
$11.09
  In Stock
Roper Dishwasher Rack Adjuster
★★★★★
★★★★★
33 Reviews
PartSelect Number PS11750255
Manufacturer Part Number WPW10204131
This OEM dishrack roller and adjuster is found in your dishwasher. They work together to support and facilitate the smooth movement of your dishrack. The dishrack rollers are small wheels located on the sides of the dishrack and allow it to slide in and out effortlessly. Meanwhile, the dishrack adjuster is used to adjust the height via the selector at the back of this component. Over time, the rollers wear out. You may experience resistance or difficulty when sliding the dishrack in or out. If left unreplaced, your rollers or adjuster may break, causing dishes to tilt, collide, or fall over during the wash cycle. When removing a roller and adjuster from your appliance, you will need to pull out the dishrack partway. Detach the assembly by depressing the tabs on the two end stops before lifting them up. Keep in mind that the roller and adjuster are sold together, but the dishrack itself is sold separately.
Installation Instructions
Randy from Glenview, IL
Replacement of broken Rack Assembly Mount with Wheel
The only piece that may be a little difficult to remove here without a tool is the 'Track Stop'. This piece has a couple of clip-like pieces that need to be depressed in order to remove it. A flathead screw driver will do the trick. Once this piece is out and you have popped the Mount off of the Rack, you simply roll the piece out of the track, roll the new one in and snap the new Mount in place, replacing the Track Stop when you are done. VERY EASY! Read more...
Your Price
$51.57
  In Stock
Roper Dishwasher Dishrack Roller Assembly
★★★★★
★★★★★
9 Reviews
PartSelect Number PS11769236
Manufacturer Part Number W10888592
Installation Instructions
Sally from COCHRANVILLE, PA
These 3 parts were broken or missing.
I had to watch a You Tube Video and the Repair was basically snapping these parts on the rack and glide. No tools needed! Read more...
Your Price
$58.61
  In Stock
Roper Dishwasher Wheel Assembly
★★★★★
★★★★★
11 Reviews
PartSelect Number PS11745449
Manufacturer Part Number WP8268645
Sold Individually - 4 required on rack.
Installation Instructions
Timothy from huntersville, NC
The dishtrack wheel came off the track and fell into the dishwasher and melted
I snapped on the new part onto the track. It was that easy! :) Thank goodness the part was available from Part Select!
T. Edwards
Read more...
Your Price
$29.14
  In Stock
Roper Dishwasher Tandem Rack Rollers - Set of 4
★★★★★
★★★★★
16 Reviews
PartSelect Number PS358588
Manufacturer Part Number 4317933
Each tandem roller holds two wheels. There are four sets of tandem rollers in this roller kit, so you will be getting eight wheels in all. They are all white, and are meant for use on the lower rack of your dishwasher.
Installation Instructions
Karl from Endicott, NY
original wheels had fallen off, due to deteriation
first removed old wheel bracket, then installed new Read more...
Your Price
$20.14
  On Order
Roper Dishwasher Tub, Wheel Assembly
★★★★★
★★★★★
1 Review
PartSelect Number PS11746098
Manufacturer Part Number WP8528831
Sold Individually.
Your Price
$47.46
  In Stock
Roper Dishwasher Upper Rack Wheel and Mount Assembly
PartSelect Number PS11745524
Manufacturer Part Number WP8270016
This mount assembly attaches on either side of the inner cabinet wall for the upper rack. It glides over and under the the slide track.
Your Price
$36.72
  In Stock
Roper Dishwasher Lower Dishrack Wheel
PartSelect Number PS11741336
Manufacturer Part Number WP3376961
Sold Individually.
Your Price
$7.60
  Special Order
Roper Dishwasher Transport Wheel
PartSelect Number PS11745523
Manufacturer Part Number WP8269831
This transport wheel is for dishwashers and attaches to the base of the dishwasher and allows you to roll the dishwasher into the cabinet during installation.

Related Roper Dishwasher Parts