My Orders
Range Latches
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Shop By Brand
View More
Popular Range Latches
This washer lid lock assembly is designed for top-load washing machines and ensures the lid remains securely closed during wash and spin cycles. It replaces worn or malfunctioning latches, helping prevent the machine from starting or pausing when the lid isn’t properly shut. The assembly includes the solenoid mechanism that engages the lock, contributing to safe and efficient operation. Compatible with a wide range of models, it’s an ideal solution for restoring reliable performance to your appliance.
This washer lid lock assembly is designed for top-load washing machines and ensures the lid remains securely closed during wash and spin cycles. It replaces worn or malfunctioning latches, helping prevent the machine from starting or pausing when the lid isn’t properly shut. The assembly includes the solenoid mechanism that engages the lock, contributing to safe and efficient operation. Compatible with a wide range of models, it’s an ideal solution for restoring reliable performance to your appliance.
Installation Instructions
David from MOUNT CALM, TX
The lid was closed to hard causing the door strike, lid lock bezel and assembly to break.
Changing the door strike was simple just a quarter turn and it pops off. Changing the assembly, remove the screws from the back side at the top, move to facing the front of the machine pull the top toward you about a half inch and it will open. From the back unplug the correct wire, remove assembly and then install in reverse. Good luck.
The locker, or door latch assembly fits to the inside of the microwave door, and keeps the door closed. If the door on your microwave oven doesn’t appear to close properly, you may have a problem with the door latch assembly. This locker is made of plastic and measures 7 inches long x 2 inches wide. If either of the hooks is broken or does not have any spring tension, you may need to replace the assembly.
The locker, or door latch assembly fits to the inside of the microwave door, and keeps the door closed. If the door on your microwave oven doesn’t appear to close properly, you may have a problem with the door latch assembly. This locker is made of plastic and measures 7 inches long x 2 inches wide. If either of the hooks is broken or does not have any spring tension, you may need to replace the assembly.
Installation Instructions
Dave from FOREST, VA
Door locker snapped off
Unplugged the microwave. I opened the door. I used a butter knife to pop the bezel off the inside of the door. I pushed the locker up and to the left and used the butter knife to pry it loose. Disconnected the locker from the spring, and reversed for the installation.
Installation Instructions
Reginald from Bessemer, AL
Latch would remain in the locked position once the oven finished self cleaning.
Found instructions on you tube. Easy as I,2, 3. Total of eight screws to remove, then unplug and replace the handle. First kill the power to your range before starting the repair.
This microwave door latch body and switch holder is designed to secure the door during operation while properly housing the internal safety switches that control power to the appliance. It ensures the door closes firmly and signals the system that it is safe to begin cooking. Replacement is recommended if the door will not latch, feels loose, or the microwave will not start, helping restore proper door function and safe, reliable performance.
This microwave door latch body and switch holder is designed to secure the door during operation while properly housing the internal safety switches that control power to the appliance. It ensures the door closes firmly and signals the system that it is safe to begin cooking. Replacement is recommended if the door will not latch, feels loose, or the microwave will not start, helping restore proper door function and safe, reliable performance.
Installation Instructions
JOSEPH from MIAMI, FL
Power would not come on, would trip breaker when connected.
First thing I dir was search YouTube for any related videos and found this one https://www.youtube.com/watch?v=uHj4H9Fdxrc, it was the exact problem my microwave was exhibiting. Once I verified the problem by troubleshooting, I removed the part and verified that the switches were working fine, the door latch assembly showed signs of wear
... Read more
which was the cause of the problem. After receiving the replacement part I installed it, verified that power was restored to the unit and reassembled the microwave, works fine, hope it lasts a long time!
Read less
Installation Instructions
Dale from BULLARD, TX
Microwave keypad would not work and light would not go off. Found the bottom latch hook broke off and would not contact the switch
Tried to find a video specific to his model, but did not. I did the repair without removing the microwave door. Unplugged the microwave. Used a putty knife to pop out the 1st level internal plastic cover. Removed the 4 screws on the 2nd level plastic cover. Used a couple of flat-head screw drivers to pop the 2nd level cover away from
... Read more
the clips holding it on until I had room to slide the old latch off. Slipped on the new latch. Popped on the 2nd level cover and 4 screws. Popped on the 1st level cover. Plugged in the microwave, worked perfect.
Just take your time and be careful not to break any of the plastic clips on the 2nd level cover. I didn't break any, but if you're to rough could see someone breaking them.
Just take your time and be careful not to break any of the plastic clips on the 2nd level cover. I didn't break any, but if you're to rough could see someone breaking them.
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Installation Instructions
Fernando from WEST CHESTER, PA
Mirowave door latch
While installing a filter in my brand new never been used microwave range hood combo I snapped off the top door latch with my elbow. After a few expletives I search You Tube and found it was a simple fix. I ordered a replacement latch from this site. It arrived in three days and it took 5 minutes to fix.
The door lock assembly locks the oven door during the self-cleaning cycle.
The door lock assembly locks the oven door during the self-cleaning cycle.
This door strike is less than an inch long. It is all white in color and it is made entirely of plastic. The door strike fits on the inside of your range and is the locking mechanism that latches to the door to ensure the oven door stays closed. Because the door strike is made of plastic, constant use can result in the part breaking, or getting damaged. If you find that your oven door will not stay closed, or that your oven will not preheat properly, it may be because your door strike has been damaged and is not keeping the door closed.
This door strike is less than an inch long. It is all white in color and it is made entirely of plastic. The door strike fits on the inside of your range and is the locking mechanism that latches to the door to ensure the oven door stays closed. Because the door strike is made of plastic, constant use can result in the part breaking, or getting damaged. If you find that your oven door will not stay closed, or that your oven will not preheat properly, it may be because your door strike has been damaged and is not keeping the door closed.
Installation Instructions
William from Greensboro, NC
Plastic clips had broken, causing bottom skirt piece to fall off.
After attempting to order this part from Whirlpool twice and twice receiving the wrong thing, found correct part on PartSelect in about one minute. Shipment came fast and the repair was very simple, under five minutes. You just pop the pieces in place and snap the piece back onto the oven.