Light Bulb - 40W 8009 | Official Whirlpool Part | Fast Shipping | PartSelect
Quick Question!

Have you ever purchased from PartSelect.com before?

Light Bulb - 40W – Part Number: 8009
Light Bulb - 40W – Part Number: 8009 https://partselectcom.azureedge.net/Schematics/Maytag/45160.gif

Light Bulb - 40W

34 Reviews
Your Price
$4.51

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS884734

Manufacturer Part Number 8009

Manufactured by Whirlpool

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part.

This part works with the following brands: Whirlpool, Kenmore, Amana, KitchenAid, Maytag, Magic Chef, Admiral, Jenn-Air, Roper, Crosley, Caloric, Estate, Hardwick, Litton, Norge, Inglis, Broan, Hoover, International, Dacor, Thermador, Gibson, Sharp, Frigidaire, General Electric, Glenwood

This part works with the following products: Refrigerator, Range, Wall Oven, Dryer, Freezer, Microwave, Microwave Oven Combo, Washer, Bath & Ventilation Fan, Washer Dryer Combo, Range Hood, Cooktop

Videos For installing this part.

Questions & Answers
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sort by:

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 67 reviews What's this?
1-15 of 67
192 of 371 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench (Adjustable)
Customer:
judie from mays landing, NJ
Interior drawers were off their rollers
pulled the washer out and replaces the top roller system on both sides and the replaced the weels and brackets on the bottom drwaer. however i had trouble putting the dish washer back correctly and had to call a repairman to adjust the dishwasher and alighn it to open and close properly. but i did do good inside. i feel it was easy and a success. thank you for having the supplies for us to attempt to repair it on our own.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

63 of 92 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Customer:
Jim from Placentia, CA
Oven (not broiler) element burned out, no oven heat
Inside the oven, I removed one Phillips screw on each side where the element mounts to the back oven wall. Then disconnected the wire on each side using pliers. Unscrewed glass lens, unscrewed light bulb. Replaced all pieces in reverse order. Took less than 10 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

35 of 46 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Wrench (Adjustable)
Customer:
Gary from Saxonburg, PA
Gas oven stove temperature 125 - 100 degrees below normal
My Hotpoint gas stove was not operating at normal temperature. This was operating in a basic range of 125 - 100 degrees below normal. After going through numerous troubleshooting posts, I came to the conclusion the sensor was my first place to check. I did not want to drop $100 for a sensor if I did not need to, therefore, I decided that I needed to know how many ohms the sensor registered in my stove. The sensor need to be 1100 ohms and after using my digital multi-meter,( Analog meter would do for this job as well) sure enough the sensor did register 1100 ohms. I then started troubleshooting other components such as igniter, gas values, etc... All resulting in everything testing out good. That is what really puzzled me. Other posts of people having similar symptoms as my oven always came back to the sensor as the problem. Then I noticed that the cleaning temperature of the sensor needed to be 2600 ohms or somewhere in that range. Therefore, I heated up the oven and tested the temperature of the heated sensor and my sensor registered 1650 ohms. I concluded that the sensor tested good at room temperature, however when heated up, it was not registering correctly. I took a chance and purchased the senor, installed the sensor, which was quite easy and only reqired removing a few screws inside the stove, removal of back panel, and unconnecting the wire attachments, and the oven now operates as new, and just in time for Thanksgiving. The really great thing was that I was a hero in the eyes of my wife this Thanksgiving.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

31 of 36 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
Customer:
Arau from Haverhill, MA
The door was crocked and wouldn't shut properly
Everything was easy. I read one of your other reviews and it gave me the confidence to try it myself. First i toke off the cap at the top of the door then the three screws. I lifted the door off so i could be sure the cam was my only problem then put the door back on. That took 5 mins. Then I got on the computer and ordered the parts i needed. Two days later the parts arrived and and i took the door off again. Then put the new cam on, applied a litle vasiline, put the door back on and forgot that i ever had a problem. Thanks for the help. Doug Arau

Help other customers find the most helpful instructions.

Were these instructions helpful?   

29 of 34 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Customer:
Todd from Collegeville, PA
Refrigerator door weatherstripping torn
Removed all screws on the door that retained weatherstripping, removed weatherstripping and inside of door. Inserted new weatherstripping, lined up inside of door and loosely re-installed screws. After minor alignment adjusting, went back and tightened all screws. Replacement part was a perfect fit.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

36 of 55 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Customer:
B L from Lima, NY
The oven light has been broken forever-i turned on the oven and the element started flaming.
My husband replaced the bake element in moments. We couldn't get the broken light out of the socket because we couldn't locate our needle nose pliers. After a few days I finally got tired waiting and found a small pair of pliers in the house and got the remains of the bulb out and screwed it in, and plugged it in and we're in business!
Never wait for a man to do what you can do yourself!
I was so pleased that ordering the parts on-line was so easy and I didn't have an expensive repair bill to pay!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

25 of 29 people found these instructions helpful
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Customer:
Rose M. from Bradenton, FL
The light bulb was burned out and the lens cover was damaged.
The lens cover was easy to replace, but the bulb could not be extracted from the hole where the lens cover was (although it was indicated on the Internet that we could). We needed to get inside the dryer, but did not know how. I checked out a book from the library which told how to open the top dryer panel, but that way did not work. After a little more searching on the Internet, I was able to find a website that had FREE appliance repair manuals: http://www.appliancerepair.net/clothes-dryer-repair-5.html and that worked. It told us how to remove the FRONT panel. After removing the FRONT panel, not the TOP, I was able to replace the bulb easily. I was pleased to have been able to do this without calling a technician.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

11 of 17 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Customer:
Thomas from Queensbury, NY
Refrigerator not cooling, freezer thawing but cold.
I removed the back lower panel within the freezer compartment. The cooling fan which draws cold air from the evaporator unit was functioning fine. I then unplugged the unit.
The evaporator unit was frozen in a block of ice. I removed all food contents from both the freezer and the refrigerator, moving them to a back-up refrigerator. I then allowed the radiator to thaw completely overnight. Upon restarting the unit it became cold within an hour thus I new the compressor was fine. I surmised it must be a defrost issue. I then unconnected the defrost heater and thermostat assembly. The device was easy to remove. I then routed the wire of the new assembly on the side of the evaporator unit and clipped the thermostat back onto the cooper feed, plugged the unit into the connection. Next I turned my attention to replacing the adaptive defrost timer. In the top of the refrigerator compartment, I removed the plastic shroud, by sliding back and pushing the plastic clips in. I took out 4 screws holding the unit to the ceiling of the refrigerator. Slowly lowering this, I could see the adaptive defrost timer in the right rear corner. I simply unplugged the unit and replaced with a new unit. I replaced both items although I am unsure which was not working. Refrigerator is working fine now.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16 of 33 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Customer:
Richard from Menifee, CA
No problems encountered.
Used nutdriver to remove screws holding cover over oven light socket, unclipped electrical connectors, removed socket by hand, then reversed the foregoing. Easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

37 of 96 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Customer:
Ronald from Coraopolis, PA
Both light bulbs in refridgerator and freezer burnt out
Removed the bulbs and replaced

Help other customers find the most helpful instructions.

Were these instructions helpful?   

9 of 12 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Customer:
Stanley from Sulphur, OK
Bake element bad
Inside oven, remove two screws that hold element to back wall, pull element out three or so inches to get to wire clip connections, unclip wires, remove bad element, put new element in in reverse order of taking out bad element, just that simple. Also this site was so easy to use, plus the shipping time was unbelieveably short, even a company service man couldn't have been that quick, or as reasonable. Thanks a bunch!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 9 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Customer:
Lawrence from New Orleans, LA
Broken handle, oven temperature problem
I removed the door by opening partially and pulling upward. It was a little heavy and you should make sure you have somewhere to put it. I removed screws and reinstalled the handle into the new door trim that had broken. It gave a great opportunity to clean the oven.
I then unscrewed the temp sensor from inside the oven and removed the back panel of the range to unplug the wires. I plugged in the new wires and tightened the screws.
The light bulb was easy. I pulled off the cover and unscrewed the old and screwed in the new. It was a lot of screwing and unscrewing but 3 easy tasks all the same.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

9 of 13 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Customer:
LOUIS from FREEPORT, TX
Oven light would not work, old bulb broken
Had already removed back covers and disconntedted power. When io received parts I replaced them in reverse oder I had removed them. Took me longer to replace back covers because of my bad diabetic hands. Thanks very much, yopu savbed me a bunch. God bless you and yours, god bless america.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 7 people found these instructions helpful
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Customer:
Rae Ann from Petaluma, CA
Clock/temp control not lighting up
We turned off the stove at the breaker panel. Took off the front top panel of stove and replaced the replacement board. It had three attachments to plug in. We then replaced front panel and turned on the breaker. The stove worked perfectly. It is very nice to have a clock and temperature reading visable again. Part Select was very easy to order from and we received our part within a couple of days. Will certainly suggest them to friends and will use them again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

71 of 202 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Customer:
Darla from Thomasville, PA
Bottom dishwasher rack kept getting hung up in dishwasher. Oven light burned out, one oven rack missing at time of home purchase.
It was a "snap" to repair diswasher wheels(snapped off the old and replaced witht the new ones) and bumpers(heated them in hot water first so as not to break them before snapping them into place)!

Oven rack simply needed to be placed into the oven.

Hardest part of this project was replacing the light bulb. Removed two screws that held glass lens/metal frame in place. Twisted bulb left to remove it. Glass bulb released itself from the metal base instead of coming out as one piece, so I had to disconnect the power source, then get plastic handeled pliers to remove the metal base that was still inside the socket. Once that was removed, the new bulb was placed into the socket, power was reinstated and "wa-lah!" there was light in the oven again! Hooray!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-15 of 67
Customer Reviews
Average Rating:
34 Reviews
4.5
out of 5
Filter By Rating:
  • 5 Stars
    27
  • 4 Stars
    2
  • 3 Stars
    2
  • 2 Stars
    0
  • 1 Stars
    3
Sort by:
Sort by:

Model Cross Reference

This part works with the following models:

PartSelect Number: PS884734
Manufacturer Part Number: 8009
Brand
Model Number
Description
Maytag
102000
Litton
102001
Microwave - Table Top
Litton
102002
Hoover
1035
Wall Oven
Hoover
1037
Wall Oven
Admiral
1058AF-CW
Range - Electric
Admiral
1058AF-CZ
Range - Electric
Admiral
1058AH-W
Range - Electric
Admiral
1058AH-Z
Range - Electric
Admiral
1058WF-CW
Range - Electric
Admiral
1058WF-CZ
Range - Electric
Admiral
1058WH-W
Range - Electric
Kenmore
106.52574200
Refrigerator - Kenmore Refrigerator Model 106.52574200 (10652574200, 106 52574200) Parts
Kenmore
106.55122700
Refrigerator - Kenmore Refrigerator Model 106.55122700 (10655122700, 106 55122700) Parts
Kenmore
106106-8130600
Refrigerator
Kenmore
106106-8130610
Refrigerator
Kenmore
106106-8130620
Refrigerator
Kenmore
106106-8130630
Refrigerator
Kenmore
106106-8130640
Refrigerator
Kenmore
106106-8130650
Refrigerator
Kenmore
106106-8130660
Refrigerator
Kenmore
106106-8130680
Refrigerator
Kenmore
106106-8130690
Refrigerator
Kenmore
1061068130670
Refrigerator
Kenmore
10631400200
Refrigerator
Kenmore
10631402200
Refrigerator
Kenmore
10631404200
Refrigerator
Kenmore
10631409200
Refrigerator
Kenmore
10631410200
Refrigerator
Kenmore
10631412200
Refrigerator