Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jesse H - July 30, 2021
Verified Purchase
Perfect fit
Exact part for my stove. Works perfectly. Thank you
★★★★★
★★★★★
Brent G - December 25, 2020
Verified Purchase
Just what I needed.
The part was in great condition. It arrived earlier that expected. Wiring harness on the element was a little different than the original one. Compare both elements to get the proper wiring plan. Easy to assemble after you figure that out. Part select was the only place to have the element that I needed. I will be ordering from them again. Thanks Part Select.
BG.
★★★★★
★★★★★
Jozef P - December 19, 2018
Verified Purchase
Great part
Need same modification . extended wire
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 4 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The large top burner and the oven bake burner elements as well as the oven light had all burned out
I looked up a how to video on You Tube which I watched and then ordered the appropriate parts which I installed as soon as they arrived. Problem solved.
I looked how it came out pretty easy, check how your connections are on the unitase you unplug them. Ordered new part from patrs select. the new came in. Make sure you look at the location on the problem part of the tabs on back because it is important on the reinstall of the element ( it is easy it is numbered like a clock) plug in the w
... Read moreires and your ready to go.
Read less
Mark from Americus, GA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
24 of 27 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the 2500 watts element-surf was opened (wasn't heating)
1 Turn the circuit breaker that feds power to the range/stove off 2 Opened the oven door and found two screws that hold the top part of the range. I removed the screws and disconnected the green cable (ground) so I could have access to the Element-surt 3 Disconnected the four wires that connects the Element and removed the bra
... Read moreket that holds it. 4 Replaced the new element, connected the wires and attached the braket. 5 Connected the ground (green cable) and place the top back on place (screwed the top from inside the oven). 6 turned the power on
Read less
luis from Lincoln, NE
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
20 of 25 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Right Front Surface Element would not heat
Turn off the power to the Electric Oven. Remove the 2 screws to the oven top at the front of the stove. Lift the oven top up. Have someone hold it for you. Label the wires that go to the element you are going to replace. Disconnect the wires from the Element. Remove the screw from the bracket that holds the front and rear element in
... Read moreplace. It is located at the back of the bracket behind the rear element and you will need small phillips head screw driver. Remove the bad element.. Unscrew the two pointed bracket holder pieces from the old element and screw them into the new element in the same location as the old. Put the new element back into the bracket and put the bracket mount screw back in. Attach the wires back to the new element. Close the oven top. Install the oven top screws at the front of the stove. Turn the power back on and test the element.
Read less
Robert from Blackwood, NJ
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
80 of 97 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
19 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Craig
October 28, 2019
What are the dimensions? I need a replacement for the largest element on the stove top.
For model number GR399LXGQ2
Hello Craig, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11764906 for the Largest 2500 Watt Element. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Oswaldo
July 16, 2019
Hi, I need two 6 inch and one 8 inch burner. Where can I buy them. Thanks, I an in Miami.
For model number RS696PXGQ15
Hi Oswaldo,
Thank you for your question. You may purchase the burners from us either on our website, by visiting our live chat sessions, Monday to Friday from 8AM to 4PM EST, or by calling our customer service line at 1-888-738-4871 and anyone will be happy to assist you. If you would like to purchase the parts locally, you will need to check either online or in your local yellow pages for business that sell appliance parts. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Sally
March 18, 2020
Do you have the largest element for my model? I can not find the dimension.
For model number YGY396LXPS01
Hello Sally, thank you for your question. The largest element, the front left element is PartSelect Number PS11764906. Please enter the part number into the site for current price and availability. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Pat
April 4, 2019
The left "surface hot" light stays on always. Where is the sensor that powers this light and can it be replaced?
For model number WFE320M0ES0
Hello Pat, thank you for inquiring. This would be the Indicator Light part PS11746053 for your model.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joan
September 18, 2021
Large right front burner only burns on high. How do we get this fixed.
For model number WFE20MOEW0
Hello Joan, thank you for writing, The Large Right Front Switch is PartSelect Number PS11740783. Please view the video for the installation information. Good luck with your repair.
What is the part number for the six inch heating element?
For model number RCC3024LB01
Hi Joel,
Thank you for your question. The part number listed under your model number for the 6 inch element is PS11764915. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Huma
February 7, 2019
I need the smaller one what is its model no?
Hello Huma, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
Kathy
March 10, 2023
I need to replace the front left burner and the light bulb. Would like to know the proper part number to order. Thank you so much in advance for your help.
For model number Per5750qcw
Hello Kathy, thank you for your question. The Front Left element is PS11764915 and the Bulb is PS884734. Both of these have installation videos on our site for your convenience. Good luck!
I have Whirlpool cook top to replace element the big one.Cook top model rcc3024 lb01
For model number Cook top elment .RCC3024 LB01 Part # W10823696
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Surface Radiant Element - Part# PS11764906.
Was this helpful?
Thank you for voting!
Alicia
August 17, 2021
Both of the large burners on my stove get stuck on high. It doesn't matter what temp i have it at fr low to medium it will heat like i have it on high. Please let me know what part i need to order to fix this issue.Thanks,
alicia
For model number WFE320M0ES0
Hello Alicia, Thank you for your inquiry. We have researched your model and recommend checking both of the burner switches and the burner elements. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We also recommend checking the wiring between the elements and switches for any visible damage. Good luck with your repair.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Range","title":"Range","url":"/Range-Parts.htm"},{"position":2,"name":"Element or Burner","title":"Element or Burner","url":"/Range-Elements-and-Burners.htm"},{"position":3,"name":"W10823696","title":"W10823696","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
