Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
October 25, 2022
What should broiler element part ohm to
For model number Manufacture part number dg47-00058a
Hi Gary, thank you for the question. If the element is in working order, the meter will read from 15 to 30 ohms. If the meter reads higher than 30 ohms, the element is faulty and should be replaced. We hope this information is useful.
3 people found this helpful.
Was this helpful?
Thank you for voting!
David
7 days ago
My oven is not heating up to temperature. The display says it is at the correct temp but it’s 70 degrees off. It doesn’t seem to heat above 200 and doesn’t broil. I used the multi meter and this is what I got:
Top element 13.3 / Middle fan element 43 / Bottom element 19. Are these correct numbers? We’ve already replaced the control board, thermostat, thermostat Fuse. I was thinking i need to replace the top element next because it doesn't get red when we turn on broil. I don't see any cracks or blistering on the element though. I'm also wondering if its the display board?
For model number NE58K9430SS
Hello David, thank you for getting in touch. Based on the description that you have provided, we would recommend checking the display board, part number PS979875, to fix the issue. We hope this helps.