Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Greg
December 11, 2019
On our GE top load washing machine, we have a steady drip coming from the fill nozzle assembly in the center of the tub. This happens even then the washer is off. Is this likely a leaky water valve (6 solenoid, in this case)? Just need to replace the entire valve/solenoid assembly (along with new hose clamps)? Thanks very much.
For model number GTWS8655DOMC
Hello Greg, Thank you for the question. Yes, in most cases the valve is defective and not closing allowing the water to drip into the tub when not in use. The valve will need to be replaced. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Billy
December 11, 2019
Is there a video on how to replace this 6 valve model gtws865odows
For model number GTWS865ODOWS
Hello Billy, thank you for your question. Unfortunately, we do not have a video for this exact part, but we do have another video that would provide some helpful information. Here is the link
https://www.youtube.com/watch?v=mbSPFvYoLe4
I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Nick
October 8, 2017
I was running a basket cleaning cycle today and started getting a humming sound along with an "h2o source" alarm near the end of the cycle.I've checked both the hot and cold water supply lines, and both are clear with good pressure.I've plugged and unplugged the washer three times after waiting several minutes between tries and the alarm and hum will not clear.Am I looking at a failed pressure sensor, water inlet valve, or none of the above?Thanks in advance, Nick.
For model number GTWS8650D0WS
Hi Nick, Thank you for the question. First I suggest checking any hoses for a blockage. Also check the water pressure house going to the water pressure switch for a leak or blockage. If everything checks out to be ok , the water valve may need to be replaced. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Fernando
26 days ago
What is the difference between the following hose clamps:
part #PS8688212 and part #PS8688213
For model number GTWS8650D0WS
Hello Fernando, thank you for reaching out. Based on our research both the clamps hold the end of the water hose in place to prevent the hose from leaking water, but goes on different hoses. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
