This is a replacement shock absorber for your washer. The shock absorber is approximately 9 inches long and a little more than one inch wide. It is black and silver in color, and is sold individually. There are four shock absorbers on your washer, and they support the tub and prevent it from shaking around. If your washer is shaking or making a lot of noise during operation, you may need to replace the shock absorber. It is important to determine if you have one or more shock absorbers that need replacement before you begin the repair. This is an OEM part from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
General Electric.
Part# WH01X10727 replaces these:
AP5793647
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Chuck L - July 20, 2022
Verified Purchase
The right parts for the right jobs
Was glad to replaced these dampers for the washer. it stopped excessive shaking, walking movements.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 1.3 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer was vibrating during spin cycle
Problem got worse the technician installed the damper assembly but the problem got worse . The machine sounds like a tractor .
Linda from Miami, FL
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jean
December 5, 2018
Hello, My washer shakes a lot a makes noises, however i disassembled and found that all the parts suggested are still good. These are the dampers, the ring balance and the rear tub (the bearings are still good and there is no leak). What else could be causing such a vibration to the point where the detergent component is open at the end of the cycle. thanks, jean
For model number GFWR4805F3R
Hi Jean, thank you for your question. Usually when you are having this issue in a front load machine it is the dampers that are the issue. If you remove the parts and are able to pull the metal portion of the damper away from the housing then it will need to be replaced. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
