Part Location Diagram of 137221600 Frigidaire Drain Pump - 120V 60  Hz.
See part F35 in the diagram
Replacing your Frigidaire Washer Drain Pump - 120V 60  Hz.
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Drain Pump - 120V 60 Hz. 137221600

 Fits your SWS1339CC2!
★★★★★
★★★★★
23 Reviews

Rated by 21 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 146.86
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your SWS1339CC2!
PartSelect Number PS7783938
Manufacturer Part Number 137221600
Manufactured by Frigidaire
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Check if this fits your product and find model diagrams

Need help finding your model number?
Product Description

Drain Pump - 120V 60 Hz. Specifications

This is a 120 volt, 60 hertz drain pump that is manufactured to remove water from the tub of your washer once your clothes are washed. This part is the pump and motor assembly, which includes a red flapper to prevent drain backflow. You will need to remove the front panel of your washer to access the drain pump. The tools you will need for the repair are a Phillips screw driver, a putty knife, a pair of slip joint pliers, and a 5/16 nut driver. Be sure to disconnect the water supply from your washer before doing the repair. The metal edges on the appliance are sharp, so use work gloves to safely complete the repair.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not drain | Leaking | Not draining
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Frigidaire, Westinghouse, Kenmore, Gibson.
Part# 137221600 replaces these:
AP5684706, 2754548, 137221600, 131724000, 134051200, 134740500, 137108100, 137151800, 137151800KITK
Back to Top
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

30 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rachel
December 11, 2017
The washing machine is re-filling with dirty water slowly after spinning. The solenoid valve was replaced but didn't fix issue. If spin cycle w/no spin, only drain is used afterwards all the water remains ejected and doesn't return. Does this mean an issue in pump or can we simply replace the red flapper/check valve? Thank you
For model number LTF6700FS0
PartSelect logo
Hi Rachel, Thank you for the question.The red flapper is more then likely the issue but is not sold separate from the pump so the pump will need to be replaced. Good luck with the repair!

13 people found this helpful.

Was this helpful?
Thank you for voting!
Andrew
February 21, 2018
The washer is not draining completely. When we go to start it back up again the door locks, the lights come on, but then the lights will go out a few seconds later, and the machine switches off. Unable to drain the water, and i am unable to use the system at all. Any ideas?
For model number ATF6700FE2
PartSelect logo
Hi Andrew, Thank you for your question. There are a few parts that you should check. First check your drain tubes and pump filter to make sure there are no obstructions. Secondly, you should check your door lock to make sure it is working correctly. It also may be your drain pump that is giving you the issue as well, so it would be good to check that part. I hope that helps. Good luck with your repair.

9 people found this helpful.

Was this helpful?
Thank you for voting!
Tim
January 10, 2018
The washer makes it through all cycles except the last or final spin cycle at the 12 minute mark starts briefly and about the 6 minute mark just stops and shuts off clothes are still very wet. What would be the issue?
For model number ATF7000FS0
PartSelect logo
Hi Tim, Thank you for your question. If the timer is not advancing beyond the final spin cycle, you will need to check the timer, the door lock and switch assembly and the shock absorber kit. I hope this helps. Thank you and have a great day!

7 people found this helpful.

Was this helpful?
Thank you for voting!
CECILIA
August 12, 2017
I am trying to attach a new pump to a front-loading washer and had no problem removing the damaged one but can't manage to attach the new one because no room to get my hands in to turn screws. Is there any way to remove the front panel on this machine?
For model number GLTF2940FE1
PartSelect logo
Hi Cecilia, Thank you for your inquiry. You should have had to remove your front panel to get to the part. If you take a look at this part information you will see an installation video that will show you how to remove the front panel to get to the part. Good luck with your repair.

6 people found this helpful.

Was this helpful?
Thank you for voting!
Ed
January 22, 2018
When I tried to start my washer, it sounds as if it is starting but the drain pump started and then it stops. It makes a terrible sound. The whole unit still hums. I was not sure if this was a pump problem or if the door lock was not locking. Any ideas?
For model number GLTF2940ES3
PartSelect logo
Hello Ed, Thanks for your question. You may want to check the impeller to see if anything managed to get clogged inside. If not, try testing the drain pump and the door switch with a multimeter to see if they have continuity. Replace either of them if they are not showing continuity. I hope this helps.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Howard
September 8, 2017
I push the start button the pump starts after a few seconds the washer shuts down.
For model number 41744052400
PartSelect logo
Hi Howard, Thank you for your inquiry. There are a couple of parts that could cause that issue but I think that the part you will want to check first is the door lock switch. Sometimes when your machine will pump water but will not continue into the cycle, the lock had failed and the machine thinks that the door is open. I hope this helps. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Allistair
April 4, 2019
Machine would wash but after some time it would stop during the cycle and then after some time you would hear a click sound and then the cycle starts again. This will continue for the entire washing and it makes washing longer than it should be. What could possibly be the problem?
For model number FEX831CS0
PartSelect logo
Hello Allistair, Thank you for the question. This sounds like the Timer Switch, PartSelect Number PS418697 is not processing through the cycles properly and will need to be replaced. Thank you for your inquiry, good luck with this repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Akil
October 7, 2017
Clicking sound when turning the cycle tuner and the water won't drain. What part would i need?
For model number FWS777GHS0
PartSelect logo
Hi Akil, Thank you for your inquiry. If you are selecting a cycle and the timer is clicking you need to check the timer. If the washer is not draining there are some parts that you will need to check to see which one is causing the issue. You will need to check the drain pump, the drive belt, the drain hose and the lid strike. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Lorna
April 25, 2018
How to replace timer for wash cycles?
For model number FFLG1011MW0
PartSelect logo
Hi Lorna, Thank you for your question. Unfortunately we do not have any installation information for your model or part. However here is a video that will show you how an installation of a switch on a washer usually goes: https://youtu.be/iA1aTEyFIjM. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Gary Emmerick
April 27, 2018
I have water spraying out under washer,and when it starts to wash it's making a load squeaking noise
For model number FAHE1011mwo
PartSelect logo
Hello Gary, thank you for your question. Open the access panel to see if a hose has come loose or if the water is coming from the drain pump or sump. With the loud noise you're having it is most likely the drain pump that has failed and will have to be replaced. I hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
Part Videos

Replacing your Frigidaire Washer Drain Pump - 120V 60 Hz.

Replacing your Frigidaire Washer Drain Pump - 120V 60  Hz.
Customer Repair Stories
 Average Repair Rating: 3.7 / 5.0, 21 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Drain pump froze during subzero temp
Just like the video said in the parts menu remove front of washer remove 2 screws remove 2 hose clamps replace pump replace 2 screws replace hoses and clamps and front door to washer done
  • Buford from LAWTON, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The water would not completely drain and go to spin cycle and noisy while trying to drain.
I ordered pump so I would have it on hand. I didn’t want the washer in pieces waiting on parts. New pump came in 2-3 days with standard shipping. Found a video online for this model. Removed top. Removed control panel and set on front edge of frame. Removed door seal spring. Removed front panel and separated seal from drum. Pump located at bottom left. Removed pump screws. Got a shallow pan from kitchen to catch water. Removed hoses and trap. Not much water. Took trap boot and pump to sink for cleaning and found a bra wire had made it past the screen and was rubbing on pump impeller. That was the noise. Cleaned and reinstalled old pump. Has been running for 2 months without a problem. Easily returned the new pump! Highly recommend this company and site. Will come here for my repair jobs first. Hope I remembered all the steps correctly since it has been over 2 months.
  • Tim from DEFIANCE, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking drain pump
Replaced drain pump using this walk through. Different models, but pretty straight forward.
  • Michael from MEDFORD, OR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer did not drain, would not cycle; pump was 'humming' and not moving water
Remove front lower access panel: two phillips screws at the lower edge then the panel slid down and off. Removed 5/16 pump mounting screws then slid a shallow pan under pump to attempt to catch stale water, removed left side (inlet) hose clamp and wiggled hose off to drain water with some success, some spillage. Removed outlet hose, turned the pump around to remove electrical connection. Reversed steps to mount new pump and after fighting with spring clamp on outlet side I chose to replace that spring clamp with a 1 1/2" stainless hose clamp which then could be tightened with a screwdriver and only took a minute to wrap up.
  • DANIEL from PINCKNEY, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Impellar was broken on the washer drain pump.
Removed front panel and unplugged wire connector to drain pump. Loosened two hose clamps and removed hoses the unbolted drain pump from washer frame. Simple removal and even simplier installation of new drain pump.
  • Michael from IOWA PARK, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pump motor made humming noise and wouldn't drain water from tub.
Disconnect power. Disconnect water hoses. Remove back panel. Remove top panel. Disconnect bladder ring. Disconnect control panel wire harness and control panel. Remove front panel. Disconnect hose clamps to drain hose and tub drain hose. Disconnect pump motor power supply wire. Disconnect pump screws. Now do everything in reverse replacing old pump with new.. One special note: replace factory hose clamps with new hose clamps.
  • Matthew from Oakford, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The water did not drain at all . You could hear the pump spinning , but it was not .
After making sure there was no blockages and the pump was not jammed I knew it was time for a new one . Unplug the machine and turn off the hot and cold water . Remove the two screws on the bottom of the front of the machine and push down on the panel it should come right off . Make sure all the water is drained out of the tub use a wet/dry vacuum to suck out all the water if needed . Then with the vacuum empty squeeze the clamps that hold the hoses on the pump and push them out of the way . Use the vacuum to suck up any leftover water, as you remove both hoses . Unplug the one set of wires going to the pump . Remove both screws and the pump should now be loose . Do the same thing in reverse to install the new pump . Other than dealing with the water it should take under 15 minutes . Good Luck
  • Lawrence from STATEN ISLAND, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spin Cycle wouldn't work
Replaced pump, by removing back panel and removing the two screws holding the pump to the bottom of the machine. The only difficult aspect was dealing with the hose clamps, these were extremely awkward to work with in a confined space. The repair would have been less than 30 min if the hose clamps weren't so difficult to put back in place.
  • KEITH from BEND, OR
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
9 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water not draining
It turned out that the pump was fine. There is a filter within the rubber bellows between the washer drum and the motor. You need to remove the entire bellows to get to it. Just remove the motor and you can un-clip the hose tensioners. They are exactly like the ones you would fine on most foreign cars - just compress with pliers and move back on the hose. Clean out the plastic filter. A small nail had worked its way through the plastic filter and lodged in the motor impeller. Removing this nail and reassembling, it all worked as new! I kept the pump and motor as a future spare rather than return it.
  • Harold from Denver, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
22 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Machine would not spin.
Once I figured out that it would not spin because it did not drain. Unplug machine and remove the back pannel. Locate the drain pump on the bottom of machine. Remove the power wires and the screws holding it to the bottom. Then use a pliers to remove the hose clamps ( was easer for me to tip the machine forward ). Be prepaired to catch or soak up extra water from lines. The hardest part to the install is the limited room you have to work with. Install screws to hold the pump in place then install water lines, power wires and back pannel. Only thing left is to plug it in and watch for leaks.
  • Jeff from Weyauwega, WI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
19 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Customer Reviews
Average Rating:
★★★★★
★★★★★
23 Reviews
5.0
Filter By Rating:
  • 5 Stars
    22
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Model Cross Reference
This part works with the following models:
PartSelect Number: PS7783938
Manufacturer Part Number: 137221600
Brand
Model Number
Description
Kenmore
41744052400
Washer
Kenmore
41744052401
Washer
Kenmore
41744052500
Washer
Kenmore
41744082400
Washer
Kenmore
41744082500
Washer
Kenmore
41744092500
Washer
Kenmore
41744152400
Washer
Kenmore
41744152401
Washer
Kenmore
41744152500
Washer
Kenmore
41744252500
Washer
Kenmore
41744252501
Washer
Kenmore
41748102700
Washer
Kenmore
41748102701
Washer
Kenmore
41748106700
Washer
Kenmore
41748112700
Washer
Kenmore
41748112701
Washer
Kenmore
41748116700
Washer
Kenmore
41790802990
Washer Dryer Combo
Kenmore
41790802991
Washer Dryer Combo
Kenmore
41790802992
Washer Dryer Combo
Kenmore
41790807990
Washer Dryer Combo
Kenmore
41790812990
Washer Dryer Combo
Kenmore
41790812991
Washer Dryer Combo
Kenmore
41790812992
Washer Dryer Combo
Kenmore
41790814000
Washer Dryer Combo
Kenmore
41790814001
Washer Dryer Combo
Kenmore
41790814002
Washer Dryer Combo
Kenmore
41790817990
Washer Dryer Combo
Kenmore
41790862990
Washer Dryer Combo
Kenmore
41790862991
Washer Dryer Combo
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service