Fuse Kit 8193762 | Official Whirlpool Part | Fast Shipping | PartSelect
We’re open and continuing to ship packages, however we are experiencing shipping delays. Call volumes are high, please use our self-serve options to cancel or return your order. Learn about our response to COVID-19
Fuse Kit – Part Number: 8193762
Fuse Kit – Part Number: 8193762 https://partselectcom.azureedge.net/Schematics/Whirlpool/CFHX927E.gif

Fuse Kit

PartSelect Number PS774514

Manufacturer Part Number 8193762

Manufactured by Whirlpool

Product Description

Fuse Kit Specifications

When replacing these fuses the wire harness must be replaced as well. It is located in the control panel. The harness is included with this part now.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Will Not Start | Not draining

This part works with the following products:

Dishwasher.

This part works with the following brands:

Kenmore, KitchenAid, Whirlpool, Inglis, Estate, Roper.

Part # 8193762 replaces these:

8193762, 8193762VP, 8269213, 959376, AP3178588.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Part Videos

Replacing your Kenmore Dishwasher Fuse Kit

Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 45 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
tony from carrollton, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
8564542, 8193762
Controller board replacement
Simple task - remove the front door cover to expose the cover for the control panel which is then also removed. Be sure electricity is disconnected from the appliance, then simply remove the old control board (remove the quick-connect wire harness) and slide the replacement board back in. Reconnect wiring harness, replace cover and door panel, then turn-on electricy. NOTE - I suggest you shut off power at the breaker panel vs. disconnected the direct wiring at the appliance. The reason for this is because the new controller board could be damaged in the process of connecting the wires and any sparking that would take place when working with hot wiring.
218 of 239 people found this instruction helpful.
Was this instruction helpful to you?
William from North Providence, RI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
8193762
Dishwasher not responding.
First I checked the power supply and noticed the breaker was not tripped. Confirmed the unit was getting power. I then downloaded a parts breakdown from the Kitchen Aid website and noticed there was a fuse mounted in the control section. Using my digital multimeter I confirmed there was no continuity through the fuse. I then ordered the part, installed it and washed a load of dishes:-)
58 of 63 people found this instruction helpful.
Was this instruction helpful to you?
James from Ventura, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
8193762
no power to anything...shut off mid-cycle
I removed the 6 torx screws that hold the control panel on the top part of the door, from the inside, removed the large plastic cover from the control board, removed the 2 big wires that go to the thermal fuse...tested for continuity and foung the fuse faulty...ordered a new fuse kit, reversed the procedure and it works like new.
32 of 32 people found this instruction helpful.
Was this instruction helpful to you?
GLENN from CLIFTON PARK, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
8564547, 8193762
Dishwasher stopped working, 2" of water in bottom of tub, no lights on control panel.
Checked main house circuit breaker to ensure not tripped - was OK. Removed dishwasher lower kick panel to access 120 main feed (make sure main circuit breaker is OFF!) to ensure had 120 volts to unit - OK. Removed upper control panel (6 screws) to access main control board and main fuse. Checked fuse for continuity - no continuity, blown fuse. Continue to inspect main "Control Circuit Board". Found burn marks from over heating on main circuit board at 4 pin connector (tan wire that goes to one of the two door switches). Replaced main circuit board and fuse. Ohm checked heating element to ensure within specs (10-30 ohms) - OK. Cleaned up burned connector by removing terminal CARFEFULLY and cleaned with wire brush. Checked continuity/ohm's of both door switches (should be close to 0 ohms) and cleaned terminals at both door switches to ensure good contact. Reassembled unit, restored power at main house breaker, loaded dishwasher and ran unit through normal cycle. All worked like new! TIP - ensure main water feed coming from spigot is minimum 120 degrees, per manufacturer, as this will aid in shorter cycle times and reduce energy consumption. PLEASE USE CAUTION WHEN PERFORMING THIS TASK AS 120 VOLTS IS DANGEROUS!
28 of 34 people found this instruction helpful.
Was this instruction helpful to you?
Scott from Chisago City, MN
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
8193762
No power
Replaced electronic control panel first which had an obvious defect (burned terminal). Still no power. Replaced fuse and works fine now. Took lots of reading to find out the dishwasher had a replacable fuse. Even the appliance store didn't know.
19 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Gary from Warrenton, VA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
8193882, 8193762, WP8269209, WP8269117
Unit Would Not Work.
I had no lights on the console. Found the internal fuse blown, as I was looking around noticed the door latch also broken so I replaced that as well. Items were easy to identify from the bom and repairs completed in about 15-20 minutes. Dishes all clean now.
19 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Gary from Centennial, CO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
8193762
Stopped running in the middle of wash cycle.
Removed leads from fuse and installed jumper wire (while the power was off, then turned back on) to determine that circuit board was still good. Ordered new fuse and installed using existing wire connections. Did not splice in new connectors that came with fuse. Wires were clean and good and did not want to cut and splice.
12 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Mary Ellen from Fairfield, VT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
8193762
The dishwasher would not turn on
Very simple. We had to remove the screws holding the metal cover on the inside of the dishwasher to access the electrical panel. Then we disconnected the wires that were connected to the fuse kit, unclipped the kit from the panel, clipped the new one on, and replaced the wires. Then all we had to do was screw the metal cover back onto the inside of the door and it worked just fine.
11 of 14 people found this instruction helpful.
Was this instruction helpful to you?
John from Chula Vista, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
8193762
No power to dishwasher
First I shut off the breaker for the dishwasher. I had to remove the 6 screws that hold the top part of the dishwasher door to find the panel with the fuse. Then following the instructions that came with the new fuse I cut the wires from the old fuse to remove it. Next I installed the new fuse and attached the wires and then replaced the screws. Turned the breaker back on and everything worked great.
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
CAROLYN from FOLSOM, LA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
8193762
Not working - Clean light flashing
I replaced the heating element. It did not fix the problem. Called a repair man
8 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
17 Reviews
4.5
out of 5
Filter By Rating:
  • 5 Stars
    12
  • 4 Stars
    3
  • 3 Stars
    0
  • 2 Stars
    2
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS774514
Manufacturer Part Number: 8193762
Brand
Model Number
Description
Kenmore
665110739120
Dishwasher
Kenmore
665110739130
Dishwasher
Kenmore
665110739140
Dishwasher
Kenmore
665110739190
Dishwasher
Kenmore
66514353300
Dishwasher
Kenmore
66514353301
Dishwasher
Kenmore
66515872000
Dishwasher
Kenmore
66515874000
Dishwasher
Kenmore
66515879000
Dishwasher
Kenmore
66515882000
Dishwasher
Kenmore
66515884000
Dishwasher
Kenmore
66515887000
Dishwasher
Kenmore
66515889000
Dishwasher
Kenmore
66515892100
Dishwasher
Kenmore
66515894100
Dishwasher
Kenmore
66515899100
Dishwasher
Kenmore
66515912000
Dishwasher
Kenmore
66515912001
Dishwasher
Kenmore
66515914000
Dishwasher
Kenmore
66515914001
Dishwasher
Kenmore
66515919000
Dishwasher
Kenmore
66515919001
Dishwasher
Kenmore
66515922000
Dishwasher
Kenmore
66515922001
Dishwasher
Kenmore
66515923000
Dishwasher
Kenmore
66515923001
Dishwasher
Kenmore
66515924000
Dishwasher
Kenmore
66515924001
Dishwasher
Kenmore
66515929000
Dishwasher
Kenmore
66515929001
Dishwasher