This is a flange gasket for a food waste disposer or garbage disposer. The gasket provides a seal between the sink opening and disposal flange. You may need to replace this gasket if your appliance is leaking. This part is located between the sink flange and a separate fiber flange gasket and support ring. It is an OEM part that is sourced directly from the manufacturer. The gasket is approximately 4.5 inches in diameter from the outer edges and 1/16 inches thick. This part is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Food Waste Disposer.
This part works with the following products:
General Electric.
Part# WC03X10007 replaces these:
AP5670682, WC3X116
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
5.0
Filter By Rating:
5 Stars
3
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Victoria V - April 7, 2023
Verified Purchase
Got more than I wanted, was what I needed
Came with more than just the rubber gasket. I guess they were out. It worked out though bc I needed to replace the whole top part anyways.
★★★★★
★★★★★
William D - November 24, 2019
Verified Purchase
The gasket fit perfectly and was just what I needed.
I was happy to find the two gaskets at PartSelect and avoid having to replace my entire garbage disposal. Prompt shipping was good too, although maybe a bit high.
★★★★★
★★★★★
Stephen K - February 20, 2019
Verified Purchase
Right part. Had my plumber install it.
After the install, the leak was gone! So glad to have this problem SOLVED! Thank you!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.3 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Leaky GE Disposall
Mount Ring was very difficult to remove. Hammer needed to unlock. Once removed, rubber and fiber gaskets were easily replaced. Cushion Mount did not attach properly to sink flange after many attempts, so Mount Ring was placed too high for hopper to attach. The cushion mount was finally placed on flange correctly (not sure why it attached
... Read moreincorrectly previously) but all is well with no leaks. Dishwasher hose needed to be re-attached after hopper mounted and locked in position.