The splash guard, also known as a mounting gasket, is used for garbage disposals. The guard creates a tight seal between the sink and the garbage disposal ring. This part is black in color and made of...
The splash guard, also known as a mounting gasket, is used for garbage disposals. The guard creates a tight seal between the sink and the garbage disposal ring. This part is black in color and made of...
The sink flange attaches to your sink drain opening and provides a connection to mount the disposal unit to the sink itself. If your food waste disposer is leaking, there are a few places that you sho...
This is a flange gasket for a food waste disposer or garbage disposer. The gasket provides a seal between the sink opening and disposal flange. You may need to replace this gasket if your appliance is...
This item is sold individually. The fiber sink flange gasket works with your food waste disposer. This part creates a seal that prevents any water from leaking. It is positioned between the sink flang...
This support ring, also known as mounting ring, is a genuine OEM replacement part for use in food waste disposers. It is a circular plastic piece with an outer diameter of 4.75 inches. It is found ins...
This is an elbow outlet and gasket for a food waste disposer or garbage disposer. This part connects the disposer to the drain pipe in your home. If you notice a blockage or a leak, you may need to re...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wayne
December 4, 2019
How do you unjam the garbage disposal?
For model number GFC320V
Hi Wayne,
Thank you for your question. If your garbage disposal is jammed, first unplug it from the electrical outlet or turn the circuit breaker off. Before performing this repair turn the garbage disposal on to make sure there is no power to it. Then check the bottom of the disposal for a hex-shaped hole. Insert a 1/4 inch hex wrench into the hole and force it back and forth a few times to free the impellers. Some models may have a reversing switch that will do the same thing. If your disposal does not have a hex hole or you cannot find a hex wrench, put a short broom stick into the disposal. With the with the power disconnected, force it down against one of the blades, and try to rotate the impeller back and forth. If there is an obstruction causing the jam, use a pair of tongs to remove it. NEVER use your hands to remove the object. In some situations, you may have to remove the garbage disposal to remove the jam. For information on how to remove/install your disposal, please refer to your owner's manual. Here is a link from our website that you may use to reference it, https://partselectcom.azureedge.net/assets/manuals/6E8F06EED21BBD769404B6E904503F91EF55814A.pdf. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
The splash guard for the disposer was deteriorating and kept falling into the disposer and getting chewed up making it even less reliable. I purchased two different 'universal' splash guards at the hardware store. Neither of them fit. I finally crawled under the sink with my eyeglasses and a flash light to find the model number. I se
... Read morearched for the model number on part select and received veery quickly. I just popped it in (less than a minute) and now everything is wonderful. Don't buy a new disposer (my wife wanted me to) buy the replacement part that is giving you trouble at PartSelect!
