Average Repair Rating: 1.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water leak, no power,shorted control motherboard, diverter passive main assembly rubber hose had hole in it.
repair under warranty for Home Depot. Ordered new controller, new sump manifold, new piranh clamp kit, new diverter passive main assy, installation took 6 months. Could not finish as GE had changed the diverter to a new design with the same part number that the repairman had no knowledge of and there is no part available for the same conf
... Read moreiguration of the one that went bad, after I called GE tech line they were not aware of updates. Giving me the same numbers. The new design works if you order a new conduit main. As the old one in the dishwasher will not connect to the new Diverter. New deverter no. WD19X25278 and the new main conduit is the same as the old configuration no.WD12X21681 . The repair people and parts people are not yet aware of the design change and availability of parts, as most are out of stock and no updated pictures of the new design. Repair warranty washed their hands of this and Home Depot after 6 months gave me credit of my full price I bought this for 3 yrs ago. Repairing myself and sell.
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
November 7, 2017
What is included with this kit? It has to be more than just the clip, right? Thank you
For model number GDT580SSF2SS
Hi Jerry, Thank you for the question.This kit includes 5 clamps. Three small and two large.Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Hayden
June 18, 2019
Does this come with both clamps for motor?330 & 335 in diagram?
For model number Gdt580ssf4ss
Hello Hayden, thank you for writing. Yes, all three of the different Clamps come in this Kit for your model. There are a total of five Clamps in the Kit.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jeannette
July 16, 2019
What tool is required to install the piranha clamp.
For model number PDT750SSF2SS
Hi Jeannette, thank you for your question. You would either need a pair of pliers or a screw driver depending on if you have a screw tightening the clamp or if it is more spring like. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Chris
February 28, 2023
Hi. The diagram for the converter kit shows two clamps needed which is what I have on my dishwasher. Are the other clamps in the package spares. I notice in one of your answers to a previous question concerning this that you said 3 clamps are needed. Just want to make sure I'm ordering the right parts.
For model number DDT595SSJ4SS
Hi Chris, thank you for the question! According to our research, the clamp kit, part number PS6011682, includes five clamps. Three small and two large. You may only need two clamps for the repair, and the rest can be used as a spare. We hope that helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.