Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jim S - January 20, 2021
Verified Purchase
Perfect fit, as discribed
Wish the price was less, but it was the exact fit replacement.
★★★★★
★★★★★
Trini B - January 7, 2020
Verified Purchase
Did the trick!
Part arrived timely, installed ourselves and it fixed the problem!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
put the safty valve in
turn the gas off unplugged it form electric removed the line took the flame plate off removed burner tube and the screw out with a nut driver that was all just put it back in reverse
Donald from Conway, SC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Wrench (Adjustable)
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Safety valve would not open
I am an HVAC tech by trade so it wasn't difficult to diagnose problem with safety valve. The hard part was being without an oven for a week. Repair was simple and effective--oven works good as new. Shut off gas and unplugged oven. Removed floor of oven between broiler and bake section, used wrenches to disconnect gas line from saf
... Read moreety valve in back of oven, used philipps head screwdriver to remove burner assembly and gas valve, reversed process to replace. Checked out operation--OK.
Read less
Ed from Darby, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Wrench set
125 of 157 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
18 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Domenic
November 10, 2017
I can see the igniter glowing but the oven will not light. I do not smell gas when trying to light the oven.
For model number 79070402012
Hi Domenic,
Thank you for your question. You may want to check the temperature sensor inside of your oven, your igniter, and your spark module to determine which part is not working. You can test these parts with a multi meter to be sure. Good luck with your repair.
6 people found this helpful.
Was this helpful?
Thank you for voting!
John
September 23, 2017
Igniter glows gas wont come on but can smell gas when putting the oven on?
For model number FGF316DSE
Hello John, thank you for contacting us. That sounds like a bad igniter or a bad safety valve. The gas valve will only open based on the power draw from the igniter, so it may glow but the gas valve will not open to light it. If you are smelling gas then the valve may still be opening even though the igniter is not drawing enough power, or the igniter is also faulty and not able to ignite the gas. You may want to replace both parts. Hope this helps!
Lp gas kit changed all 4 top valves flipped over gas ajust to lp. I think it may need valve for oven turned on oven, Flame way to high help
For model number FFGF3011LBF
Hi Howard, Thank you for the question. You have to unscrew the nut on the valve and flip it over to convert it to LP. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Toby
December 2, 2021
Oven igniter glows but no flame, smell of propane evident. Gentle tap on safety valve cover and flame from burner tube ignites.
For model number CRG3160GQQA
Hello Toby, Thank you for the question. With the information provided, this sounds like it could be a faulty Safety Valve and it should be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tommy
March 8, 2023
how many ohms should the gas safety valve read?
For model number lfgf3014lwc
Hello Tommy, thank you for your inquiry. The resistance value for the safety valve must be between 0 to 5 ohms to be working correctly. We hope this information is useful!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Chris
December 10, 2019
Will this fit my Frigidaire gas oven? The oven igniter draws about 3.5amps but the oven Flame is very small and it takes about 50 minutes to reach 350f. The broil igniter draws the same current and it has a large blue Flame. Could it only this half of the safety valve only that is defective?
For model number CGLGF388DSE
Hello Chris and thanks for writing.
No, but dual safety valve Part Number: PS977703 is in the list of compatible items for your model. Hope this helps. Please contact us anytime. This safety valve is a dual one so it should take care of your problem.
Done lp conversion flip over valve on regulator and Flame on oven too big and yellow
For model number Ffgf3011lwj
Hello Jose, Thank you for the question. You will need to Re-adjust Oven Air Shutter until you have the proper flame height and color. Hope this helps!
Was this helpful?
Thank you for voting!
Jerry
March 14, 2019
What nut are you talking about ? The orifice or the inlet? Oven burns but not very hot.
For model number FGF348KSE
Hi Jerry,
Thank you for your question. They are referring to the orifice. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Randall
August 22, 2019
Does this use the same safety gas valve and orifice for propane as natural gas
For model number 790.71202700
Hello Randall, thank you for your question. The orifices for liquid propane are different than the ones for natural gas. The Natural Gas to Liquid Propane Conversion Kit for your model is part number PS2351422. It contains all of the necessary orifices you will need. There are no parts involved with converting the Regulator, you just need to block it open. We have a video explaining this. Here is a link: https://www.youtube.com/watch?v=2GScQhrgC3g. I hope this helps and good luck with your repair!
Was this helpful?
Thank you for voting!
Jorge
October 25, 2019
When I turn the oven on and I set it to 350 degrees or lower the oven turns off.
For model number MGF200PBWC
Hi Jorge,
Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
