The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Frigidaire, Crosley, Westinghouse, General Electric.
Part# 134014700 replaces these:
AP2108034, 890258, 131854300
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
When you pulled the timer handle out to start the cycle, the water came on briefly then went off
Removed 6 screws off the rear of the control panel to expose the timer. Unhooked two wire clip connection from timer. Unscrewed the timer knob on the front of the control panel. Removed the plastic indicator sleeve below the handle. Removed 2 Phillips screws and the timer was out
JEFF from SANDY, UT
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
8 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John Hambrick
January 30, 2019
When i set the selector for the type of load i have, it hangs up and continues to run with out timer moving. So would this be the timer or something else.
For model number GLTF1670ASO
Hi John,
Thank you for your question. If the timer is working correctly on the other cycles and it is not working on one cycle, then the issue is the timer and it will need to be replaced. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ulrich
July 4, 2023
How do I get the control panel off so I can get to the timer?
For model number GLTF1670ASO
Hello Ulrich, thank you for contacting us. We would suggest following these general instructions for removing the control panel of your washer: First, remove the top panel by unscrewing the screws holding the brackets. Slide the top panel slightly forward, and lit it up. Remove the dispenser by pulling it out all the way. Remove the knobs off the control panel. Next, remove the control panel by inserting a putty knife from both sides and giving it a slight push. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
