Maytag/Maytag_Thumb/SNX2HFCI.gif
See part 100 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Replacement Ice Maker

★★★★★
★★★★★
104 Reviews
$ 124.38   On Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS358591
Manufacturer Part Number 4317943
Manufactured by Whirlpool
Product Description

Replacement Ice Maker Specifications

This ice maker (Complete Icemaker Assembly, Whirlpool Icemaker Kit, Ice Maker Assembly, Refrigerator Ice Maker, Icemaker) receives water from the water inlet valve, freezes it, and dispenses it into the ice bucket until the bucket is full. Ice makers will need to be replaced every 3-10 years depending on the frequency of usage, and water quality. You can perform a voltage test with a multimeter or perform an inlet valve test. If you’re unable to make ice, or notice leaks then it may be a sign your ice maker is damaged and could be in need of a replacement. This model measures approximately 11x5 inches, is constructed of plastic and metal, and comes in black/silver. This ice maker is a complete assembly; the whole assembly attaches to the wall of your freezer.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Leaking | Ice maker won’t dispense ice | Ice maker dispenses too little ice
This part works with the following products:
Refrigerator, Ice Maker.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Roper.
Part# 4317943 replaces these:
AP2984633, 1857, 4317943, 4210317, 4211173, 4317943, 4317943R, 4317943VP, 46000978556, 46004211173, 480616, 480617, 482014, 482015, 482016, 482017, 482018, 482019, 482020, 482394 ... Show more , 482433, 482990, 625601, 625603, 625610, 625611, 625622, 625625, 625653, 625656, 625660, 626002, 626201, 626237, 626366, 626461, 626489, 626608, 626609, 626626, 626636, 626640, 626670, 626687, 627572, 68972-4, 797991, 8114, 833701, 978552, 978553, 978556, 99989730, M626687, W10122496, W10190952, W10281545, W10632400 Show less
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

48 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alan
September 23, 2017
Ice maker is not making ice. It does not appear water is going into the tray area, yet water is coming into the refr. As you can still use the water glass fill, at the door. I could always order a new ice maker, but hate to do same, removing and installing a new one and finding the problem is elsewhere. Help!
For model number ed2chqxkq05
Hello Alan, thank you for contacting us. That sounds like it would be the icemaker control assembly. This part controls all the ice maker functions as well as the solenoid which controls the water flow to the ice maker. When this fails you will still get water to the dispenser as the water inlet valve still works properly. Hope this helps!

27 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Rudy Burger
December 5, 2017
How do i set the water level in my ice maker
For model number 4317943
Hello Rudy, Thank you for your inquiry. The ice maker has an adjustment screw that needs to be turned to set the water level. Remove the cover of the icemaker. The adjustment screw is on the right side of the control module. Turn the screw clockwise to reduce the water level, but no more than 2 complete revolutions. Hope this helps you!

11 people found this helpful.

Was this helpful?
Thank you for voting!
John
September 10, 2017
Ice maker does not shut off when arm is lifted
For model number KTRA22EMSS04
Hi John, Thank you for your inquiry. You would have to replace your icemaker to fix this issue. Good luck with your repair.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Cameron
May 1, 2018
My ice maker stopped producing ice. I thought it had to do with the arm not initiating the ice making mechanism, as i believe i tinkered with it a bit and it worked for a little bit more. Also i just realized there is no water coming out of the water dispenser (it has always been pretty low flow, perhaps a filter issue). Any suggestions? Do i just get the replacement ice maker or could the issue have to do with water?
For model number Whirlpool ED5HEXNB00
Hello Cameron, thank you for your question. It sounds like you may have a water flow issue. If the water is slow to the dispenser, and the icemaker wasn't work, then was tinkered with and worked for a bit more the water may not be coming into the icemaker enough to make the ice. I would suggest replacing the Water Inlet Valve Part Number: W10408179 and perhaps the filter, if it hasn't been changed in a while. If the issue continues with the icemaker, we would recommend testing the icemaker to determine if its an issue with the motor module, which is basically like the timer for the icemaker. It calls for ice, allows the water to freeze, activates the dump cycle then calls for more water. I hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Terry
August 8, 2018
I'm having problems with ice maker or in that area. What tells the water to shut off after it fills tray, is there a sensor in ice maker? The problem is water is not shutting off sometimes and makes a frozen waterfall in freeze (what doesn't hit the hardwood floors) thank you
For model number jrsd2490t
Hi Terry, Thank you for your question. There would be two parts that could cause this issue. It is either the ice maker is calling up too much water, or the water inlet valve is sending up too much water. I would suggest testing your water inlet valve first, to make sure it is not malfunctioning. If that part is fine then it would be your ice maker that is the problem. I hope that helps. Good luck with your repair.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Cathy
January 30, 2018
Hi - the part to my icemaker that guides the water into the dispenser is broken in the sense that the plastic detached from the holder, but I can and have manually put it into its proper place and it continued to work. I think my husband knocked it loose and then water went all over the insides of the freezer. I was worried that something inside was broken because I found a bit of water on the floor. I'm sorry to say i have a very dirty water filter that needs replacing. Could a dirty filter cause a water backup problem? Additionally, the water pan under the refrigerator does not have any water in it, but when I looked in there today, after I had shut off the water supply to the refrigerator, there was something that resembled black dirt in the tray. I wondered if there would be any sort of rubber or spongy material insulating anything that could have crumbled into the tray from being dry or frayed from age? Thanks for any direction with this!
For model number KSCS25FJSS01
Hi Cathy, Thank you for the question. The inlet tube just pushes into place so it may have just been bumped.If you were able to reinsert it and it is working then you will be fine. If the filter needs to be replaced the water flow will be slow or stop and it can cause a leak. The dirt in the tray could just be dirt. The fan helps evaporate the water in the try so it is normal not to see water sitting in the tray.There is no foam or filter in the tray to absorb or insulate. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Kenneth Miller
February 10, 2018
How long dose it take this ice maker to fill tub
For model number whirlpool 4317943
Hello Kenneth, Thank you for your inquiry. It can take about 24 hours for it to start producing ice, and since it usually dumps around every 1-2 hours, it can take 24 to 48 hours to fill the ice bin depending on the side. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Rudy
August 15, 2017
How can i adjust the water into my ice maker?
For model number PS358591
Hello Rudy, that is a great question. The ice maker control board would have a solenoid in it, this controls the water flow to the ice maker to keep it from over flowing. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Cynthia
September 16, 2019
Ice maker makes the ice but won’t dispense it. Then it turns the ice in the ice maker to become a solid iceberg. Could this be the points and/or the module? Help!
For model number ED25DQXAW00
Hello Cynthia, Thank you for the question. I suggest removing the Ice Bin and check it over for any damaged parts. Also make sure there is no ice build up preventing it from dispensing ice. If the parts are all good but the dispenser motor in the ice bin is not working to turn the auger, it may need to be replaced. PartSelect Number PS11739113. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Gerard
February 26, 2020
Ice maker 4317943 stopped making ice. I get water from dispenser and also when I close the circuit on the module so I think the water valve is ok. The tray and heater are in good shape. The strange thing is if I fill the tray with water eventually it will make cubes. Also the thermostat test ok. I replaced the module and no change. Any thoughts?
For model number 106.57071791
Hello Gerard, Thank you for the question. The Valve has 2 ports, for the ice maker and the water dispenser. It is possible the Valve could be defective. You can check with a multi meter to see if there is power going to the water valve when the icemaker cycles. Please see the link below for help testing a Water Valve as well. We hope this helps. https://www.partselect.com/Refrigerator+test-water-valve+repair.htm

2 people found this helpful.

Was this helpful?
Thank you for voting!
Part Videos
Difficulty: Easy | Tools Required: Nutdriver,Screw drivers
Repair Tip: To remove the shut off arm from your existing icemaker, lift the arm to the up position, unhook it from the fill cup bearing, and pull it out of the module. If you require the shutoff arm for your new replacement ice maker, be sure to order the replacemen

Replacing your Kenmore Refrigerator Replacement Ice Maker

How to Troubleshoot a Refrigerator That Doesn't Make Ice

How Does an Ice Maker Work?

How to Troubleshoot an Ice Maker That is Not Working

Test If Your Electrical Part is Failing - Multimeter Tool

Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 214 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
was not making ice
take out ice bucket, just loosen the top 2 screws, remove the bottom screw, slide ice maker up & out, srewdriver to release wiring harness clip, reverse to put back in. was very simple. did not install water inlet kit yet. water under fridge stopped after i changed the ice maker.
  • GLENN from ORLAND PARK, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
  • Parts Used:
    W10408179, 4317943
674 of 745 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker quit working, I could manually cycle unit but then the water would overflow when unit was re-filling.
I backed out the 2 top screws about a quarter inch and then removed bottem screw with a quater inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection with a small screwdriver. The new Ice Maker was wired correctley for my refrigeator so all I had to do wea reconnect the power connection and mount new Ice Maker on the two top screws and install the bottem screw. It took e while for the new Ice Maker to start it's cycle but after it did, it worked GREAT. Part Select service was OUTSTANDING, ordered part one day and received the next. THANKS!!!!
  • Max from Green Castle, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
  • Parts Used:
    4317943
570 of 590 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Ice in the Ice Maker
I am NOT a handyman, and my family laughed at me when I said I was going to fix the ice maker all by myself. I ordered a replacement ice maker. When it arrived, I opened the box and read the instructions. It seemed easy. I removed the old ice maker, with a socket set. I then took off the shut off lever from the old one and placed it on the new one, since the new one didn't come with it. I then put the new one in place. All the parts fit perfectly. The ice machine was making ice within an hour. My family was amazed... and I got the last laugh!
  • Chris from Duluth, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
  • Parts Used:
    4317943
178 of 196 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original icemaker would only make 1 or 2 cycles in a 24 hour period
The repair was extremely easy; after turning off the water valve on the back of the refrigerator, I removed the 3 screws (using a short length nut driver due to the confined space) and unplugged the harness. I did not need to splice the harness on the original ice maker and I simply plugged it into the new ice maker, screwed the unit back on and turned the water back on. It's great to have plenty of ice without having to use the ancient ice trays.

My wife had overloaded the original plastic Pan-Crispr basket with too much cheese which caused the flange to break. The replacement basket from Partselect was an exact match and simply slid in.

I'll definitely come back to Partselect for accessories and parts.
  • Charles from Greenwood, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
  • Parts Used:
    WP2188656, 4317943
127 of 215 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
icemaker leaking infreezer compartment
first I backed off top two screws and removed bottom screw. unplugged wire harness. removed old icemaker. harness on new icemaker was the same. plugged in hung new icemaker on top two screws installed bottom screw. turned water on job complete and very easy. I was very satisfied with the whole process.
  • John from Oberlin, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
  • Parts Used:
    4317943
97 of 121 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking tray created iceberg but few ice cubes!
Received my kit quickly. Job was fast and easy. Removed 3 screws with nutdriver and unpluged the wiring harness. Use a flat blade screwdriver to lift the tab on the plastic end cap of the harness. The icemaker comes out in one piece. The wiring harness that came installed on the replacement icemaker matched mine perfectly. (It comes with two others). I plugged the new one in, replaced the screws, bottom one first to help hold it while replacing the top two screws. I used the shut-off arm from my faulty icemaker. Turned the power back on and put 1/2 cup of water in the tray and walked away. Ice dropping into the bin was music to my ears. Didn't need any of the clips or things that came with the icemaker. It was basically a "plug and play". I'm so happy to have ice again, and at a great savings!
  • Brenda from Palm City, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
  • Parts Used:
    4317943
47 of 76 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker would not stop putting out water, then would not make ice
First, I unplugged the power to the entire fridge, and then removed the ice tray and ice door. Next, I unplugged the flat plug in the very back left behind the icemaker. Then I removed the 1/4" hex head sheet metal screws (2) and the phillips head screw (1) that hold the icemaker to the left side of the freezer wall. New icemaker came with a different style trip arm, so I used it. Plugged new icemaker in before reattaching it with the same (3) screws. Replaced ice tray and door, plugged in fridge, and waited....Dumped its first batch of ice maybe a couple of hours later. Not much trouble-shooting is needed when the entire icemaker is as easy and relatively inexpensive to replace as this. Twenty minutes, max.
  • Phil from Felton, DE
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
  • Parts Used:
    4317943
42 of 52 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No ice, water to dispenser OK
Originally replaced water inlet valve, not the problem. Tried to work from cheap to expensive.
1. Turn off power, shut off water supply
2. Loosen top two screws of ice maker (will slide up and off, no need to take top two out)
3.Remove bottom screw from ice maker
4.Pulled unit, snapped out existing wire harness
5.Cut hole for water inlet on end of new unit and attached wire icemaking on/off bracket.
6 Connected existing wiring harness to new unit
7. Slid new unit down onto top two screws, put in bottom screw and tightened all three
8. Turned on power and water supply
Had ice being made within two hours. Part Select has given me great service, highly recommend.
  • Mike from Myrtle Beach, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Socket set
  • Parts Used:
    4317943
37 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker Stopped Making Ice
I had a technician called out to the house to look at repairing several appliances that all have broken parts after just 3 yrs of use. Hood, Microwave, Oven, Fridge all in need of minor repairs..

Anyway - the estimate was $240 to replace the ice maker. I ordered PS358591 for $104. and it came in a couple days.. I took out one screw - slid out the icemaker, unplugged it - plugged in new one and slid it in the slot - and done !! Took about 20 mins.. didnt need any of the wiring harnesses in the box from partselect. Was way to easy to do !!

Thank you !
  • robert from kennesaw, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
  • Parts Used:
    4317943
36 of 43 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker stopped working due to defective timing gear
I removed two screws on the top and one underneath the unit. Then I disconnected the cable. The hardest part was getting the nut driver on the bottom screw because it was obscured by the unit. The replacement unit plugged right in! I got my first batch of ice in about 20 minutes. All I really needed was the timer unit, but the entire ice maker wasn't much more expensive, especially when you consider the time saved on installation!
  • Nicholas from Boca Raton, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
  • Parts Used:
    4317943
34 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
104 Reviews
4.8
Filter By Rating:
  • 5 Stars
    90
  • 4 Stars
    10
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    3
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS358591
Manufacturer Part Number: 4317943
Brand
Model Number
Description
Kenmore
1061105299
Ice Maker
Kenmore
10647021790
Refrigerator
Kenmore
10647021791
Refrigerator
Kenmore
10647022790
Refrigerator
Kenmore
10647022791
Refrigerator
Kenmore
10647028790
Refrigerator
Kenmore
10647028791
Refrigerator
Kenmore
106482394
Ice Maker
Kenmore
10648562893
Refrigerator
Kenmore
10650022000
Refrigerator
Kenmore
10650022004
Refrigerator
Kenmore
10650027001
Refrigerator
Kenmore
10650027002
Refrigerator
Kenmore
10650027003
Refrigerator
Kenmore
10650027004
Refrigerator
Kenmore
10650032000
Refrigerator
Kenmore
10650032003
Refrigerator
Kenmore
10650032004
Refrigerator
Kenmore
10650037000
Refrigerator
Kenmore
10650037001
Refrigerator
Kenmore
10650037004
Refrigerator
Kenmore
10650202991
Refrigerator
Kenmore
10650202992
Refrigerator
Kenmore
10650202993
Refrigerator
Kenmore
10650203993
Refrigerator
Kenmore
10650209991
Refrigerator
Kenmore
10650257000
Refrigerator
Kenmore
10650257001
Refrigerator
Kenmore
10650259001
Refrigerator
Kenmore
10650259002
Refrigerator

Get in touch, we're here to help!

Open until 10PM EST

Contact Customer Service