Heating Element Assembly

Hi John, Thank you for the question. In most cases you can see physical damage to the element if it is burnt out. I suggest testing the element with a multi meter. You can also test the Thermostat , Part Number: PS3530481 and the Thermal fuse, Part Number: PS3530485 on the element fuse and the Thermister, Part Number: PS3529026 and the thermostat, Part Number: PS8747887 on the blower housing. In most cases one of these parts are defective. Hope this helps!

Hello Amber, Thank you for your question. The heating element should be reading between 0-50 ohms of resistance. Hope this helps!

Hi Don, Thank you for your question. You will need to test the part with a multi-meter. Disconnect your dryer from the power source and locate the heating element. Depending on your model, you may need to open your dryer’s cabinet to access the heating element. Remove the heating element from the dryer and visually inspect it for signs of damage or burning. Set your multi-meter to the Rx1 setting and touch the probes to element terminals to test for continuity. If you receive a reading of infinity, you need a replacement heating element. We hope this helps. Thank you and have a great day.

Hello Debi, Thank you for your inquiry. We are showing that part# 5301EL1001J is the updated replacement for 5301EL1001A. We hope this helps.

Hello Sheila, Thank you for your inquiry. We show that this part has two wires, so two terminals. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hello Keith, Thank you for the question. With the information provided, this is normally an indication the Onboarding PCB Control Board is defective and may need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!